Trad Gang

Main Boards => PowWow => Topic started by: cloudbaseracer on December 02, 2013, 05:26:00 AM

Title: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: cloudbaseracer on December 02, 2013, 05:26:00 AM
Do you guys have a way to hold your longbow in a vertical position close to your foot with an arrow nocked and ready?  I have tried to think of ways to do this but so far have been unsuccessful. I shoot an A&H ACS which has a narrow reflex deflex design if that would make a difference,

I would like to say I am aware I have a lap and can use that so please don't mention that as I looking for alternatives.

Cheers,
James
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: kbetts on December 02, 2013, 09:17:00 AM
I have a holder that stabs into the ground.  Its basically a horizontal "u" shape welded to a stake.  I'll try to remember to take a pic.
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: Caddo on December 02, 2013, 09:40:00 AM
When I use a tent blind, I just lean the top limb against the tent. All I have to do is pick it up and shoot. This doesn't work so well with short recurves.

LD
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: ChuckC on December 02, 2013, 10:02:00 AM
I don't have a name, but I saw some on sale recently at my local Menard's store.  I know they are out there.  What I saw sounds very much like what kbetts describes, with a spike bottom.

ChuckC
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: Bob T. on December 02, 2013, 05:27:00 PM
James,  http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=106010;p=0
This is a improved model of what I make. I've used one since the 60's, works great.

Bob T.
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: Pine on December 02, 2013, 08:47:00 PM
I like to make a trypod and have the bow in front of me like this .
 (http://i982.photobucket.com/albums/ae302/bruinbow/1012131611-00_zpsd4612ab9.jpg) (http://s982.photobucket.com/user/bruinbow/media/1012131611-00_zpsd4612ab9.jpg.html)
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: Hud on December 03, 2013, 07:13:00 PM
Two or three forked sticks stuck in the ground. Just cut to the length you need.
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: Florida lime on December 03, 2013, 07:26:00 PM
From the SPOT 360 chair thread:

QuoteOriginally posted by John146:
I have put together a video that shows the Spot 360 Hunting Seat and Bow Holder as well. Just click the link below to view.

 http://www.youtube.com/watch?v=ZtJfCKNjMHE  
The bow holder near the end of the video might be what you are looking for.
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: ChuckC on December 03, 2013, 08:13:00 PM
Many of us sew small "pockets" onto our hunting pants to perform the same as that bow holder.  I have a pair with a gusseted pocket with an area just above my knee that is perfect for use when standing on a treestand.

I usually use a 6" square piece of carpet remnant that I throw down on the ground to place my bow tip on(when sitting ground blind)and hold the bow upright against my knee.  I shoot lefty so I have been holding the bow on the left side with my knee inside the string, the bow facing string left arrow tip right, and my left hand just kinda making sure it doesn't go anywhere.

It is upright and right there for when I need it, and the tip is not in the dirt.

ChuckC
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: Bill Kissner on December 03, 2013, 08:36:00 PM
I made an "S" out of some pretty stiff wire. Hook one end on one of the overhead fiberglass rods and hang my bow from the lower half. Put it close to the side and the roof will not collapse.

On edit, this is if you are using a Double Bull type blind.
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: mickeys4 on December 05, 2013, 08:05:00 PM
Run a Google search for Ground Bow Holder then click on images, at the top of search results. This should give you plenty of ideas for DIY holder.
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: calgarychef on December 06, 2013, 11:45:00 AM
Just use whatever's handy, the more gizmos we need to carry the less our chances of success.
Title: Re: Anyone Have A DIY Longbow Holder For Ground Blind?
Post by: Jerry Jeffer on December 06, 2013, 01:36:00 PM
Nice looking bow Graps. Sorry guys, I keep mine across my lap because I shoot almost horizontal anyway.