Guys- Using Adcock tuning system- you have to set up 1/2 dozen arrows including some fletched shafts?? This makes no sense to me if you are starting from scratch. It seems to me all I want to do is shoot, cut, and modify ONE shaft until I get it flying accurate. . So why can't I just shoot the bareshaft with variables of pt. wt. and shaft length until I have a true shooting shaft? Righthanded- nock right= stiff; nock left = weak. Does it really have to be more complicated? At 190fps I sure seem to see the nock clearly going left or right?
:confused:
I only use one of each, a bare and a fletched. Just shoot them multiple times. You're right, though, you can do it exactly as you say. However, I don't trust one shot to be an indicator of anything, so I shoot a few shots to verify what I'm seeing.
You're also right that you can see which way a shaft is leaning in flight. I've also seen guys totally mess up their form trying to watch the shaft fly. But I can guarantee you get the same results by focusing on where the groups are in relation to each other, maybe even better. It's difficult to tell exactly how much lean a shaft has in flight.
For example, I know that if I'm 6" right or left at 20 yards with a bare shaft, that equals about 50 grains of point weight or an inch of shaft. I don't know how that translates into shaft lean.
Thanks. Two makes some sense. . . .
I have asked myself the same question! What if it is a new bow-new shafts and you don't have any fletched yet?? LOL
It is a great tuning system just the same. :thumbsup:
I do as you describe. I do not feel the need to make 1/2doz arrows up for tuning. I make up 2. One fletched and one bareshaft, and track my groups, adjustments, point weights with photos or notes.
I do like to OL adcock method of tuning. It has worked well for me, along with Stu's caculator to get me close for a starting point.
Good luck,
B