Trad Gang

Main Boards => PowWow => Topic started by: guzzi2000 on September 08, 2007, 12:19:00 PM

Title: another grizzly question?
Post by: guzzi2000 on September 08, 2007, 12:19:00 PM
After reading through Dr. Ashley's report, I understood in order to get the maximum results from the Grizzly heads my arrows would have to be fletched right wing. If so then the only head mentioned for left wing are Abowyer heads? I can't seem to find them listed anywhere. Are there others singled bladed heads that canbe used with a left wing fletch.
Title: Re: another grizzly question?
Post by: guzzi2000 on September 08, 2007, 12:32:00 PM
Sorry should said Ashby.
Title: Re: another grizzly question?
Post by: SlowBowinMO on September 08, 2007, 02:52:00 PM
If your handy with a file you can make about any head a single bevel left side head, except the Grizzly that is.  I've done it with a Wolverine for example and it works well.

I'm not sure who exactly has the Abowyer but I understand they are good heads but kind of expensive.
Title: Re: another grizzly question?
Post by: Sharpster on September 08, 2007, 06:05:00 PM
Here's the link to the Abowyer site.

I hear that they are great heads but, a little pricey.

http://www.abowyer.com/index.html

-Sharps
Title: Re: another grizzly question?
Post by: zilla on September 09, 2007, 12:16:00 PM
QuoteOriginally posted by Sharpster:
Here's the link to the Abowyer site.

I hear that they are great heads but, a little pricey.

 http://www.abowyer.com/index.html  

-Sharps
Pricey is right.  like $38 for three of em.. They may be good but not that good IMO.. I am going to buy a doz El Grande's and re-cut the bevel , or just buy right wing feathers..