Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Dennis Allman on September 08, 2007, 12:09:00 PM

Title: Pearson brace height
Post by: Dennis Allman on September 08, 2007, 12:09:00 PM
I am tuning a Ben Pearson Sovereign GOLDEN Knight "60" for my brother. Does anyone know the factory spec. for brace height.

Any infor. appreciated.

Dennis
Title: Re: Pearson brace height
Post by: shamus on September 08, 2007, 02:20:00 PM
check out this site:

      http://www.archeryarchives.com/      

hit the search key. apparently your bow was made in 1965,66,67, and 1968. Brace height varied by year if manufacture.

1965: Brace height 7 to 71/2 inches
1966: Brace height 71/2 to 8 inches
1967: Brace height 71/2 to 81/4 inches
1968: Brace height 71/2 to 81/4 inches

 
The Sovereigns by Year:

1965  (http://archeryarchives.com/Sovereign1965.htm)  
1966  (http://archeryarchives.com/Sovereign1966.htm)    
1967  (http://archeryarchives.com/Sovereign1967.htm)  
1968  (http://archeryarchives.com/Sovereign1968.htm)

Hope this helps. I have a few Pearsons of my own, and have mentioned them on my website.
Title: Re: Pearson brace height
Post by: shamus on September 09, 2007, 02:32:00 PM
ttt
Title: Re: Pearson brace height
Post by: Dennis Allman on September 09, 2007, 08:16:00 PM
Shamus

Thanks for the information, a great help. I am at 8 1/4 now, will work my way down, and see if I can find the sweet spot. Thanks.

Dennis
Text only | Text with Images