Trad Gang

Main Boards => PowWow => Topic started by: 54calLEADballs on September 11, 2013, 10:12:00 PM

Title: Traditional rests
Post by: 54calLEADballs on September 11, 2013, 10:12:00 PM
So on my longbow has a piece of I think leather. It looks worn out. What's the best material to put down for the rest? I see a lot of furs. I included a pic of mine
(http://i46.photobucket.com/albums/f147/r0bb6ub9/5B6DD46A-9FDA-4404-B44C-BFA5A7E1DA77-12836-000009198E69705E_zpsde2deb13.jpg)
(http://i46.photobucket.com/albums/f147/r0bb6ub9/9E246E65-10B4-4511-B203-F715BB5D3748-12836-000009198929690F_zps25f193c1.jpg)
Title: Re: Traditional rests
Post by: Longrifleman on September 11, 2013, 10:15:00 PM
If the bow shoots well, and puts arrows where you want them, I would be very careful about replacing that rest material with something that doesn't have the same thickness.
Title: Re: Traditional rests
Post by: nineworlds9 on September 11, 2013, 10:23:00 PM
I like calf hair or soft side of Velcro
Title: Re: Traditional rests
Post by: Cmane07 on September 11, 2013, 10:39:00 PM
I too like the calf hair.
Title: Re: Traditional rests
Post by: Charlie Lamb on September 12, 2013, 12:04:00 AM
If you are the one who put that wear on the rest and adjacent shelf finish, I'd suggest looking at your tuning.
Something is hitting the shelf pretty dang hard and that would be an indication of a poorly spined arrow.
Title: Re: Traditional rests
Post by: Kituwa on September 12, 2013, 12:58:00 AM
That bow looks like its cut way past center so it might benifit from a thicker side plate and a tune up.
Title: Re: Traditional rests
Post by: Shawn Leonard on September 12, 2013, 07:38:00 AM
Yup, tune up and industrial velcro, that is all I use. It too will wear though if thr Bow is not tuned well! SHAWN
Title: Re: Traditional rests
Post by: Slickhead on September 12, 2013, 08:29:00 AM
I like Bear hair.
Two little strips.
One on the shelf and one on the riser, making two contact points.
I take small scissors and trim the inside edge to an angle
The inside corner of the shelf had nothing for the feather to contact.
This makes the arrow lay into a spot that is less likely to "bump" out.
Also my bow shoots the best with this set up.
The only complaint is the Bear hair adhesie isnt rain proof. So I often take some extra rubber cement to help it.
Title: Re: Traditional rests
Post by: Coop on September 12, 2013, 09:26:00 AM
I always liked either bear hair or Velcro like mentioned. However on the recurve I am shooting now I had trouble shooting off the shelf so I have an old stick on rest on it.
Title: Re: Traditional rests
Post by: VictoryHunter on September 12, 2013, 09:39:00 AM
x2 on velcro!
Title: Re: Traditional rests
Post by: paoliguy on September 12, 2013, 09:56:00 AM
I use the furniture slide material - whatever the call that stuff. It's dirt cheap at the big boxes. It's like soft side of Velcro but has a slicker feel to it and it comes in a sort of buckskin color that I like better.
Title: Re: Traditional rests
Post by: ISP 5353 on September 12, 2013, 05:50:00 PM
I prefer calf hair, but velcro works just fine too.
Title: Re: Traditional rests
Post by: Sirius Black on September 12, 2013, 06:07:00 PM
Velcro.
Title: Re: Traditional rests
Post by: Mr. fingers on September 12, 2013, 11:52:00 PM
Velcro
Easy to obtain  and very cheap.
Title: Re: Traditional rests
Post by: Kituwa on September 13, 2013, 12:01:00 AM
I prefer velcro or calf hair but thoseold stick on rubber bear rests work very good on most bows too. I use feather rests on all my bows now. I love those things.They do raise the arrow up higher off the shelf than velcro but they sure are a forgiving rest.
Title: Re: Traditional rests
Post by: Dog Walker on September 13, 2013, 12:05:00 AM
I feel sorry for you Americans, in that seal skin is no longer an option for you.  We can still use it here in Canada.  It is with out a doubt, the toughest, longest lasting, weather resistant and quietest material ever!