Just wondering which degree would be the best,75x105,60x120,90x90.I shoot gold tip expedition hunter shafts.
Thanks Sam
I use the 90x90,,,,,,,,,,,,,
Mornin Sam
I use 60x120
I followed a recommendation from Arrows By Kelly. He had an article on his web site about this and his findings.
Might be able to find his web site yet, it's an interesting read.
Here's a link
http://arrowskp.com/Kelly_s_Tips.html
I use 90 x 90, haven't had any issue...
I have tried all three,didn't really see any difference in them.But all mine lately I do 4x90,I like the looks and haven't had any problem with 4x90.I think with any fletching I spend more time with tuning my arrows.If your arrows are tuned well any fletching will do fine.All my arrows now get 4 fletch at 90.
I use 90 X90 and have not had any issues either.
Hey Mark, just got back from mason,had to take Jeanie's lab to get shots,Thanks everyone for the info.Been using the 90x90,but did know which would be better.
Thanks Sam
Years ago I shot 5" 60x120 now after bare shaft tunning I shoot 3 4" with no nock feather.Any thing above 1/2 inch makes noise.
I like a 75X105 and a 4" parabolic that's been shield cut to shorten it a mite.
60 x 120 for me. Don't think it matters though.
90X90 shoot straight as an arrow :archer2:
After years of shooting four fletch, I've settled on 90x90. The others work too, tho.
I am using 4in 90 x 90. They dont look as fancy as 5 in shields but they sure do shoot nice.
Thanks everyone,been using the 4" shields 90x90.
Sam
I've tried them all and see no difference but since I take a lot Boy Scouts shooting I use 60x120 so they don't have to worry about which way the arrow is nocked. I too used the article by Arrows by Kelly.