After accidentally leaving my arrow with the last saunders 145 gr blunt I need to get more. Don't want all metal or judo. They both stick in trees and can be hard on the shaft. Any ideas? Sponsors?
to bad arrows are not 1/4 28thread, then you could just screw anything you wanted on. I say check 3R
You could use a slip on rubber blunt. I like to use them over a steel blunt, but they can be used over a bare arrow shaft also. Might be something to tinker with anyways. If you took a hack saw to a regular field point and then used one of these, you could probably make weight.
http://www.kustomkingarchery.com/Rubber-Blunt/productinfo/4766/
http://www.3riversarchery.com/Tred+Barta+Bunny+Buster+Small+Game+Blunts_iH511X_baseitem.html
Also, two small washers behind the 125 saunders and you'd be right at 150...
http://www.3riversarchery.com/Bludgeon+Screw-In+Blunt_i4367X_baseitem.html
QuoteOriginally posted by TxAg:
You could use a slip on rubber blunt. I like to use them over a steel blunt, but they can be used over a bare arrow shaft also. Might be something to tinker with anyways. If you took a hack saw to a regular field point and then used one of these, you could probably make weight.
http://www.kustomkingarchery.com/Rubber-Blunt/productinfo/4766/
http://www.3riversarchery.com/Tred+Barta+Bunny+Buster+Small+Game+Blunts_iH511X_baseitem.html
Also, two small washers behind the 125 saunders and you'd be right at 150...
http://www.3riversarchery.com/Bludgeon+Screw-In+Blunt_i4367X_baseitem.html
I had that one on my lost arrow only it was the 145or 150 they stopped making. Best blunt imho.
any opinions on the Black Widow 160 grain one.
I've used the 160's from Black Widow and have no complaints. It's a good head.