Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: 9 Shocks on July 18, 2013, 01:30:00 PM

Title: 175 grain 2 blade BH
Post by: 9 Shocks on July 18, 2013, 01:30:00 PM
Looking for suggestions on a good  screw in 175 gr 2 blade head.
Title: Re: 175 grain 2 blade BH
Post by: JimB on July 18, 2013, 01:37:00 PM
My first thought would be VPA.
Title: Re: 175 grain 2 blade BH
Post by: Bud B. on July 18, 2013, 01:37:00 PM
http://www.simmonssharks.com/products/screw-on-tiger-shark-175-grain-6-pack
Title: Re: 175 grain 2 blade BH
Post by: awbowman on July 18, 2013, 01:40:00 PM
X2 on the Simmons tiger shark
Title: Re: 175 grain 2 blade BH
Post by: WESTBROOK on July 18, 2013, 01:41:00 PM
Most any 125 glue-on and a long aluminum adapter will get you a 175'ish BH.

Eric
Title: Re: 175 grain 2 blade BH
Post by: hunthold on July 18, 2013, 01:41:00 PM
X3 tigersharks!
Title: Re: 175 grain 2 blade BH
Post by: killinstuff on July 18, 2013, 01:43:00 PM
X4 Tigershark
Title: Re: 175 grain 2 blade BH
Post by: RC on July 18, 2013, 02:06:00 PM
x5 SS.RC
Title: Re: 175 grain 2 blade BH
Post by: StickSlinger74 on July 18, 2013, 02:54:00 PM
VPA or Simmons.  Can't go wrong with either of these!
Title: Re: 175 grain 2 blade BH
Post by: Bowhunter4life on July 18, 2013, 03:02:00 PM
Magnus 1 with long aluminum adaptor...  Right at 175...  Easy to sharpen, and cut a wide path through a critter.
Title: Re: 175 grain 2 blade BH
Post by: Zradix on July 18, 2013, 03:29:00 PM
what are you hunting?
And what type of setup are you using?
draw weight, draw length..etc

the VPA, simmons, and weight adapters ideas are all good.
Title: Re: 175 grain 2 blade BH
Post by: TxAg on July 18, 2013, 04:08:00 PM
QuoteOriginally posted by Bowhunter4life:
Magnus 1 with long aluminum adaptor...  Right at 175...  Easy to sharpen, and cut a wide path through a critter.
Good affordable option right here


I do like the Simmons, too, though.
Title: Re: 175 grain 2 blade BH
Post by: SuperK on July 18, 2013, 05:33:00 PM
Don't forget the Zwickey Delta.
Title: Re: 175 grain 2 blade BH
Post by: lablover on July 18, 2013, 05:36:00 PM
Any 125 and a 50 grain steel insert will get you 175. I use the Ace Express and it flys great.
Title: Re: 175 grain 2 blade BH
Post by: Meathook 1 on July 18, 2013, 05:39:00 PM
Simmons Sharks
Title: Re: 175 grain 2 blade BH
Post by: Thunyor on July 18, 2013, 06:46:00 PM
Simmons Tiger Sharks
Title: Re: 175 grain 2 blade BH
Post by: DIAMONDBACK on July 18, 2013, 06:52:00 PM
The Eclipse were wolf is worth a look.
Title: Re: 175 grain 2 blade BH
Post by: Jake Diebolt on July 18, 2013, 08:19:00 PM
If you like the zwickey but want something narrower, the No Mercy is pretty close to 175 as a screw in. Mine come in at 170.

Haven't killed anything with them yet, so your mileage may vary.
Title: Re: 175 grain 2 blade BH
Post by: 9 Shocks on July 18, 2013, 08:49:00 PM
these will be shot out of a 50@27 zipper sxt longbow.  I shoot 29" Gt trad 3555's
Title: Re: 175 grain 2 blade BH
Post by: Florida lime on July 18, 2013, 09:10:00 PM
+1 on the Eclipse Werewolf.
Title: Re: 175 grain 2 blade BH
Post by: Panzer on July 18, 2013, 09:16:00 PM
SIMMONS
Title: Re: 175 grain 2 blade BH
Post by: Stump73 on July 18, 2013, 10:09:00 PM
Simmons
Title: Re: 175 grain 2 blade BH
Post by: Burnsie on July 19, 2013, 05:26:00 PM
Silver Flames
Title: Re: 175 grain 2 blade BH
Post by: Boomerang on July 19, 2013, 08:53:00 PM
Take a look at VPA.
Title: Re: 175 grain 2 blade BH
Post by: BuckeyeGuy on July 19, 2013, 10:32:00 PM
Zwickey delta and a long adapter.  Fair price and tried and true.
Title: Re: 175 grain 2 blade BH
Post by: SlowBowinMO on July 20, 2013, 12:29:00 PM
I would also recommend the Tigershark 175 screw in.  This is the glue on model but the blade is the same.  The screw in does extend rearward past the point insert a bit though as do all screw in Sharks, about 3/8" of an inch.

 (http://s13.postimg.org/ur6qyno3r/Shark_Pic1.jpg) (http://postimage.org/)

Love the Sharks!  Two blade penetration with multi-blade blood trails.

  Simmons Sharks at Braveheart Archery (http://www.braveheartarchery.us/eclipse_broadheads.htm)

You should be able to make a good 175 screw in (or close enough) from any 125 grain glue on head with long adapter though.  That opens up a LOT more options for you.

  :archer2:
Title: Re: 175 grain 2 blade BH
Post by: chall on July 20, 2013, 01:24:00 PM
The Tigershark , looks like a awesome blade.
Title: Re: 175 grain 2 blade BH
Post by: nineworlds9 on July 20, 2013, 01:26:00 PM
All awesome suggestions.  Here's mine:  145g STOS glue on with 34g alu screw in adapter.  179g of penetration!
Title: Re: 175 grain 2 blade BH
Post by: damascusdave on July 20, 2013, 09:18:00 PM
My first choice and last choice would be the vpa pnetrator
Text only | Text with Images