Print Page - Spine Question.

Title: Spine Question.
Post by: Echo62 on July 16, 2013, 07:39:00 AM

I shoot a 50#@28" Plainsman recurve drawing 28". I'm thinking about buying some Easton Axis 400's that are 29" with 100g inserts. Would they work for me? Thanks in advance. Keith

Title: Re: Spine Question.
Post by: Orion on July 16, 2013, 08:53:00 AM

Right on the border IMO. There's a good chance they'll work, but they also may be just a tad stiff. The only way to know is to try them. I shoot .400 Axis cut to 29 inches with 100 grain brass inserts and 125 grain heads out of 50-55# ACSs at a 28-inch draw.

Title: Re: Spine Question.
Post by: Echo62 on July 16, 2013, 08:55:00 AM

Thanks Jerry.

Title: Re: Spine Question.
Post by: moebow on July 16, 2013, 09:01:00 AM

I'm with Orion on this one. 50# bows @ 28" are .500 spine territory IMO.

Arne

Title: Re: Spine Question.
Post by: Echo62 on July 16, 2013, 10:47:00 AM

Thanks for the advice guys. I've decided to go with .500 spine MFX Classics.

Trad Gang

Main Boards => PowWow => Topic started by: Echo62 on July 16, 2013, 07:39:00 AM