Print Page - Nock height ?

Title: Nock height ?
Post by: acollins on July 07, 2013, 09:42:00 PM

Just a quick question. I have been bare shaft tuning. I adjusted my point weight and got them shooting straight in. They are sticking in with the nock end pointed at a down angle. Do I need to move my nock up or down to fix this. I would have just done trial and error, but it got to dark to shoot. Thought I would ask to save myself some time.

Thanks

Title: Re: Nock height ?
Post by: DanielB89 on July 07, 2013, 09:46:00 PM

imo: it is tough to say because your arrows could be deflecting off of your shelf to make your nock land below the point.

Good luck

Title: Re: Nock height ?
Post by: rraming on July 07, 2013, 09:52:00 PM

move the nock up, shelf deflection is nock high

Title: Re: Nock height ?
Post by: acollins on July 07, 2013, 10:28:00 PM

Great thanks.

Title: Re: Nock height ?
Post by: hedgerowhuntr on July 08, 2013, 01:37:00 PM

QuoteOriginally posted by rraming:
move the nock up, shelf deflection is nock high

X2 :thumbsup:

Trad Gang

Main Boards => PowWow => Topic started by: acollins on July 07, 2013, 09:42:00 PM