I've done several searches and found out how I'm going to crest my Cx Heritages and was wondering if a super glue type adhesive , like Loctite or gorilla super glue, would work over a water based poly coat. Would it bleed thru the poly or "eat" away at it? If so, what other cement could I use on top of water based poly on top of carbons . Thanks
Duco is generally compatible with poly. Super glue will work if you're fast but I would recommend the gel versions over the liquid.
I had some problems with all kind of glues eating away the cresting. It almost drove me mad.
Then I moved over to fletch-tape. Never looked back!
fletch tape works very well
I have gone to Saunder NPV/Arrow Mate for all of my fletching now. I use bohning products when I make aluminums or carbons and Helmsman Spar Urethane on woodies. The NPV has been great.
D.P.
I use FletchTite Platinum and feathers over water based poly and never have any problems.
Thanks guy, great info as always