What size push in nocks will fit AD Traditionals, I'd like to get some colors other than the standard white that come with them. I've used the aluminum nock adapters with regular glue on nocks before, but would prefer push ins.
Go to Arrow Dynamics on the Sponsors list...call Gary and order you some push ins if that's what you want.
I recommend the G-nock with the bushing. They can be ordered from 3 Rivers or Easton. If you want the push ins, I'll send you a handfull if you like.
(http://i47.photobucket.com/albums/f196/jjeffer/05e40a77-ca31-434e-b7be-2b289bbd0bea_zps28efe907.jpg)
Thanks guys
QuoteOriginally posted by Jerry Jeffer:
I recommend the G-nock with the bushing. They can be ordered from 3 Rivers or Easton. If you want the push ins, I'll send you a handfull if you like.
What is it about the G-nock over the push in that you prefer?
I just started shooting AD's a couple months ago. I have one set each with both nock types. Maybe the G-nock and inserts will protect from a robin hood more, but I have not really hit one dead center and gotten hard into the insert yet. I have broken a couple nocks. I have only hit one push in solid so far and it held up well.
So far I prefer the push in because it shoots with the same nock point location as my GT Trad and CE's with Easton super nocks. The G-nock needs a change in nock height so I can't shoot them without changes.
Creekwood, the push ins crack and/or fly out when stumping. Never had a G-nock come out or break in years.
I use both the regular push-in nocks and the unibushings with G-nocks, and there is no comparison as to which one is superior. The G-nocks blow the regular nocks out of the water. That said, I like the regular nocks fine, and they are easy to change out. For most things they are fine, but for a much tougher system, go with the G-nocks.
Allan
Check 3 rivers. They have a chart telling you which one fits which shafts.
there is NOT a g nock that fits ad arrows.
You buy an easton uni bushing for ad arrow. Then you buy the g-nocks 3rivers sells.
Hope this helps.
Tenbrook
http://www.3riversarchery.com/Easton+G+Push-In+Nocks+-+Large+Groove_i6754X_baseitem.html
and
(select the AD size here)
http://www.3riversarchery.com/uni+bushings_i0150X_baseitem.html
Thanks guys, found it - size 28 uni-bushing
All depends on what you like.....another choice is Z nocks....larger than Gs...that's what I like because I don't like small nocks. They r the size of bohnning classics.
Stock nocks do fit...and u can even glue them in. The stock nocks r better now but still can break.
So....there's not just one option. ..and you get to choose what you want.