Trad Gang

Main Boards => PowWow => Topic started by: K2 on January 29, 2013, 11:37:00 AM

Title: Toelke Lynx Limb Question
Post by: K2 on January 29, 2013, 11:37:00 AM
I have a Toelke Lynx with LB and recurve limbs.  The LB limbs are 48lbs and the recurve limbs are 45lbs.  

Question is are limbs interchangeable between LH and RH bows?  I want to trade my recurve limbs for lighter weight LB limbs.  Thanks for any input you can give me.  Thanks. Ken
Title: Re: Toelke Lynx Limb Question
Post by: Tutanka on January 29, 2013, 11:41:00 AM
Ken,

I am in Aurora and have 2 LH Lynx's.  I am not sure if your setup is right handed or not, if it is right handed you are more than welcome to try out my limbs on your riser.  

Paul
Title: Re: Toelke Lynx Limb Question
Post by: K2 on January 29, 2013, 11:48:00 AM
Paul,

Mine is LH also.  I am looking to trade my 45# recurve limbs or 48# LB limbs for lighter weight; 42-46 LB limbs. Ken
Title: Re: Toelke Lynx Limb Question
Post by: Tutanka on January 29, 2013, 11:54:00 AM
Ken,

My limbs do not interchange between the two risers.  My first riser was a very early model, I am not sure if Dan has started to build them off of a form or not, your best bet would be to drop Dan a call.

Paul
Title: Re: Toelke Lynx Limb Question
Post by: K2 on January 29, 2013, 12:01:00 PM
Paul,

Thanks.  Ken
Title: Re: Toelke Lynx Limb Question
Post by: Rick Richard on January 29, 2013, 12:36:00 PM
I am relatively sure Dan told me they were not once when I was looking for a set earlier.
Title: Re: Toelke Lynx Limb Question
Post by: Biathlonman on January 29, 2013, 04:32:00 PM
He told me they are not interchangeable and need to be fitted to each riser when I asked the same last year...