What do you guys use to sharpen Grizzly Broadheads with?
a GOOD file, jewelers rouge and a leather strope.......don't use alot of pressure and "feel" the edge form...you will ruin a head or two, but it will come....
PM sent
Accursharp, 10-12 bucks works on Grizzly broadheads and fillet knifes.
KME Sharpner, check out his website, you'll be glad you did.
RW
KME Sharpner, check out his website, you'll be glad you did.
RW
KME.. enough said
I use a good file and then move gradually down to a very smooth diamond stone then finally finishing up on a leather strop.
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=000115
From the HOW TO forum.
KME and/or a file and then a ceramic stick :scared:
KME :thumbsup:
Bill
Hmmm...KME looks likly it may have to be on the shopping list!!
ak.
I shoot Grizzly single bevel and find them very easy to sharpen and hold an edge. I first work the edge with a large flat bastard file, then on a diamond hone, and finish on a steel. Get a shaving edge in a few minutes.
KME for me.
Yep, KME on a large file at first then onto progressively finer stones then finish on cardboard.