Print Page - Habu Death Adder Brace height

Title: Habu Death Adder Brace height
Post by: superkodiak on August 20, 2007, 11:00:00 PM

Hey guys, just wondering what some of you are setting your Habu Death adders at for brace height. I have a 62" bow that I draw to 28 inches at about 58#. I just watched Masters of the barebow and was going through the steps of fine tuning my setup. Figure this might give me a head start on gettin it right.

Thanks,
Shawn

Title: Re: Habu Death Adder Brace height
Post by: superkodiak on April 09, 2008, 02:17:00 PM

TTT, still would like to hear what you guys are setting your Death Adders at! =) Right now, mine is shooting nice at 8 3/4 brace, but that seems a little high.

Shawn

Title: Re: Habu Death Adder Brace height
Post by: bohuntr on April 09, 2008, 02:55:00 PM

It seems like when I had mine it liked about 7 3/4 to 8".

Title: Re: Habu Death Adder Brace height
Post by: kingrider on April 09, 2008, 04:05:00 PM

Mine likes 8" even

Trad Gang

Main Boards => PowWow => Topic started by: superkodiak on August 20, 2007, 11:00:00 PM