I have some victory v3 400s 29 inces...does anybody shoot these? Was curious about setups. Bow ranges from 50 to 60# at 28.
Most of the victory's use the GT inserts, so 100 grain inserts. I had three dozen which the spine was all over the place and don't trust that Mexican made arrow. I would check the spine if possible before getting them all set up. My experience anyway
Probably will be a high foc arrow
Just trying to use what I have.
I have some of the Vforce Hv's that shoot great! Very easy to load up the front and get 28% or more foc out of em if thats what you want. They are 300 spine tho. I set a friend of mine up with 350 vforce, not hv's, they fly superb.
I have no idea what the center cut is on your riser but I'd imagine a 50 gr insert with a 150gr head might be pretty close.
I have some that I used today in the " Hitman " pass around recurve. I use the regular inserts but put 145 gr. points on them, It works out to a little over 9 Grains per pound of draw weight. The bow is 48@ 28in. Mine are 29 in long. They flew much better than I shot today.