Hey guys, I had a fellow email me wanting to start shooting a recurve.
The trouble I'm having is he is 7'2" tall and has a 35" draw. I know he needs a long recurve, but don't know where to start looking.
I have a 28" draw and shoot d/r bows so don't know much about loooong draw bows, but would like to be able to point him in the right direction.
So if any highpockets could help a short fella here, I'd appreceiate it.. :goldtooth:
What is he going to use for arrow shafts?!?!? :confused:
I don't know, will have to pretty stiff at that length. Not sure if you can find any wood, carbon, or aluminum that long.
Maybe cane with wood footing?
I REALLY look forward to watching this thread!
I can't think of a current bow designed for anything near that. As for a "production" option, maybe a Bear C riser with #3 limbs???
For arrows, I believe the longest shipping shaft today is 33.25" (please correct me if I'm wrong.) Given that, I'd go straight to wood shafts and have them footed.
Thom
Foot some carbons with aluminum.????? Bow?.????
Kenny, Maybe he can use a string loop(as they use on wheels) I saw a bow for a basketball player that had a 2 1/2" string loop to compensate for the arm length.It could be done with a loop that is double served over the end you would hold. And a double nock point on the bow string with the string loop tied above and below the nock points.
Talk about a power stroke.
Darrel Emmhoff played in the NBA years back. He was 6"10" and shot a recurve, was before compouds. Unfortunately I can't recall what type it was. Wonder if something similar to the 68" through 72" target style bows of the past would work for him. With that draw length getting a hunting weight wouldn't be a problem even with the longer bow.
Norm Johnson builds a 66" but only specs it for up to 33" draws.
Dont think I've ever hear of anyone drawing that far.
Arrow spine should be do-able if the weight is kept low, he could have the worlds fastest 45# bow. An aluminum extension/footing will keep the effective BOP farther back to help stiffen the shaft
Tell him he needs to bend his bow arm more! ( A lot more)
Eric
QuoteOriginally posted by lpcjon2:
Kenny, Maybe he can use a string loop(as they use on wheels) I saw a bow for a basketball player that had a 2 1/2" string loop to compensate for the arm length.It could be done with a loop that is double served over the end you would hold. And a double nock point on the bow string with the string loop tied above and below the nock points.
Great idea!!
Jess, I told him to go 20# lower at 28" than target weight and prob 30# @ 28 would be most needed (he shoots 78# wheel bow)
And with that he could use any arrow.
QuoteOriginally posted by jess stuart:
Darrel Emmhoff played in the NBA years back. He was 6"10" and shot a recurve, was before compouds. Unfortunately I can't recall what type it was. Wonder if something similar to the 68" through 72" target style bows of the past would work for him. With that draw length getting a hunting weight wouldn't be a problem even with the longer bow.
I was thinking of target bows too, but just because they are long doesn't mean they're designed for long draws. The more I thought about the performance aspect of these bows the more I thought a long glass/boo built to loose specs might be more forgiving than other high tech/low tolerance combos.
Thom
I may be able to help with the arrows. My father makes arrows for some of these crazy long Japanese bows. Called Kyudo Japanese Traditional bow these bows use a really long arrows I have seen them in the shop. He has them made by easton they are aluminum and I think they are over 35" I will find out. For you in the mourning when I see him. I know they are about $13 each but thats with shipping I bet we can make this work your friend.
Hope I can help
Gary D Hall
Couldn't he use some type of modified olympic setup... At my local range I'm pretty sure there are some 72" recurves...he could probably get 35lb limbs and with that draw length he'd get near 50lbs.. bad idea?
Couldn't he use some type of modified olympic setup... At my local range I'm pretty sure there are some 72" recurves...he could probably get 35lb limbs and with that draw length he'd get near 50lbs.. bad idea?
QuoteOriginally posted by lpcjon2:
Kenny, Maybe he can use a string loop(as they use on wheels) I saw a bow for a basketball player that had a 2 1/2" string loop to compensate for the arm length.It could be done with a loop that is double served over the end you would hold. And a double nock point on the bow string with the string loop tied above and below the nock points.
Wouldn't that create a ton a finger pinch?
Thom
Thanks guys! This is really helping. I knew you guys would have some great ideas!!
Thom,
If the loop is only 2-3 inches and double served it shouldnt(the double serving should be thick enough to keep it a little stiff.String loop material is also a little stiffer than regular string material.
Its about $10.00 in material to find out,its worth a shot
Kenny the 66 inch Talon static will do that with no stack with the long build on the limb/The 64 does 34 inches but starts stacking a bit after that.
Like everyone says Arrows are the real problem.
God bless,
steve
For arrow length, you can take an alum. arrow and cut the last x number of inches off and foot a full length carbon with it. This is something I do to add length to my own arrow shafts. It takes a little experimentation but gives instant high FOC and extra length.
How did you make out Kenny?
Kenny you said he shot a wheelie bow so shouldn't he already have an arrow supplier?? I know there are a tone of options for a wheelie bow that allows a shooter to shoot a shorter than draw arrow like overdraws but still..I say 36" oak dowel rods...lol I dont' think a 36" broom handle will be stiff enough for that stroke...You'll get it figured out ol buddy.
I have a 32.5" draw and shoot the 64" Black Widow PMA and it has plenty room to spare at my draw. It is rated to 34", but I think that it would do a good job. He could call the Widow boys and talk to them... or even do a try before you by=uy from them.
I haven't heard back from him for a couple days. I relayed the info given tho, and Thanks guys!!
I would take something like 2419 aluminums, and splice another few inches on the end. Butt two inserts together with a threaded rod that ties them together. Then put a 3rd insert on the tip for the business end of the arrows.