has anyone here ever used the black widow testdrive.
i bought a PLV awhile back 51@28 and found that i am overbowed so i am trying to sell it and thinking about using the test drive from BW so i can avoid going through this again.
I have a couple times. Very smooth. Cost about 50 bucks.
I did for one of my 3 widows. I bought the one they sent me (not always possible) within 45 minutes!
I have done it twice, and it resulted in me getting a longbow that I am extremely pleased with!
Its gonna cost you 60 dollars shipping of which you get 30 back if you order a bow on return they will not charge you to ship the new one. Have you contacted widow to see if they can reduce the weight on the one you have right now to a lower pondage? They can take up to 5 lbs off just depends on the bow.
I have, twice. both easy. do it.
It was very expensive when I did it...Within 3 hours I'd ordered a new bow!!!! Definitely give it a go!
Well worth it.
Done it and well worth it
I have done it, and I orderd a bow. however i liked the one i test drove much better than the one i ordered.
Done it and had my buddies bow to compare to. Well worth the cost
It worked for me,after 5 min.I knew just what to order.I have a PSAX and a PLX and wanted a PCH but was unsure of the short site window.The test drive took care of all my questions.I ordered an in stock bow and it is my favorite widow,for now.
Anybody know if you can testdrive a riser only and not a complete bow?
QuoteOriginally posted by J.Williams:
Anybody know if you can testdrive a riser only and not a complete bow?
I would say you probably could. I have tried limbs without the riser.
I wish i had read this an hour ago and i would have ask John at BW, i was checking to see if they could lower the # on my PLV and found out because it was ordered as an exact # bow they can only drop 2 to 3 # off it and i am not sure that is enough
I have and worked out good for me.
Thanks mooseman.I'm gonna look into it as I want to try an Asbell grip.