I don't understand what differences the different fletchings make. Can someone explain? I have had people tell me it doesn't matter but that just doen't make sense... I shoot right handed off a rest... Dont know if that matters but I was guessing a th shooter would want lw so it would rotate away from the shelf and lessen the chance of an impact...
Feathers are either left or right wing from nature. In my opinion it does not matter if you use either as long as you use all the same on the arrow. I played with both a few years back and saw no difference on impact point at my modest ranges with right or left wing. If the arrow is tuned properly feather clearance is not an issue for me with either.
The only time it matters is if you shoot off your hand ( to stop from getting cut) and not the shelf or rest. The arrow does not start to rotate until after it has left the bow and a well tuned set up will have very little fletch contact. So its what ever torques your cookie. Im right handed and shoot right wing. Some 30 odd years ago when i first started and had no one to ask, i thought , im right handed so right wing would be for me and now that all my fletching tools are right wing i never have tried left and have had no reason to.
wtpops has it.
If you don't shoot off your knuckles go either rw or lw. straight can work for field points, but often doesn't provide enough steerage for broadheads.
Don't use straight with Bheads.
I am right handed, so I shoot left wing. I was told that many years ago and never changed.
Left or right same same.
unless you use single bevel broadheads, then youll need to match the fletch to the broadhead rotation.
Anything but straight.
Remember, the arrow can't spin until it's clear of the string. Even then, high speed photography shows that it doesn't spin until it's a ways past the riser. YouTube has a bunch of videos showing this.
Guy
Great information... Thanks guys...
why are a couple of you saying not to use straight fletching? I'm pretty new to making my own arrows but I picked up a used jo jan multi fletcher set up to fletch straight. The person I picked it up from is very knowledgeable and said he'd never seen much different in helical and straight fletching. I've been fletching XX78 and XX75's with three 5" shield cuts and I just flectched some Carbon Express and GT 55/75's. All of these fly straight with same point of impact as the field points with Bear Razorheads. I also did some 1916's and with 100gr Muzzy 4 blades it's the same thing, they fly like darts. Just wasn't sure if it's personal experience or if there is another reason for being against the straight fletching. I've thought about getting some helical clamps but since this is working for me I figured I'd stick with it.
Left or right helical twist spins the arrow more revolutions per turn and stabilizes the shaft better which helps counteract wind planning from the bh. I suppose you can get by with shooting broadheads with straight fletching and IMO center shot and close to center shot bows have less dramatic effect on as much need for arrow stabilization since the shaft goes thru less parodox.
makes sense, I'll probably go ahead and invest in the extra clamps but I'll finish out this season with what I have and then just change over as I have to refletch arrows so I'm not wasting feathers. I have 12dz fletched that way.
QuoteOriginally posted by cahaba:
Left or right helical twist spins the arrow more revolutions per turn and stabilizes the shaft better which helps counteract wind planning from the bh. I suppose you can get by with shooting broadheads with straight fletching and IMO center shot and close to center shot bows have less dramatic effect on as much need for arrow stabilization since the shaft goes thru less parodox.
That makes sense, right now I shoot straight with my BH and they fly great. my bow is cut past center...
What they are saying have your feather going to the right or left on the arrow not strait down the shaft. I think.
12 dz arrows made up?, man you shoot a lot of critters.
If you can adjust the jig just offset the side of the feather twist so the feather is not straight down the shaft.
Straight offset works just as good as a light helical. In some cases it makes a little less noise too.
Straight will work but in a hunting shot where you are leaning out around that tree or bent over to get under the limb or twisted around at the waist and you don't get that perfect release, right or left helical will give you better stabilization and better flight in those hunting shots. JMO. I need as much help as i can get.
Go ahead and use straight fletch and broadheads if you like....but sooner or later the train is going to derail.
Not sure why some folks just love flirting with disaster.....especially when there are no advantages.
QuoteOriginally posted by Terry Green:
Go ahead and use straight fletch and broadheads if you like....but sooner or later the train is going to derail.
Not sure why some folks just love flirting with disaster.....especially when there are no advantages.
X2 sooner or later you will get that arrow that will take a right or left turn, its not good.
QuoteOriginally posted by Terry Green:
Go ahead and use straight fletch and broadheads if you like....but sooner or later the train is going to derail.
Not sure why some folks just love flirting with disaster.....especially when there are no advantages.
X2 I use fairly large fletching compared to what seems to be a growing number of people using smaller fletch. The absolute least amount of fletching I will use is 3 5" right wing feathers.
I fletched up so many because I got an excellent deal on shafts and then I try and have specific batches for each of my three bows. I shoot the XX78's out of my 72# Stealth, XX75's out of 72# Brack and I'm just now playing with the carbons on my 66# Stealth to flatten the trajectory to match my heavier bows. The main reason I fletched straight is because that is what I was set up for when I got the jig but my question earlier was one of interest in educating myself and I was just stating so far on the range they are shooting good. The one thing I have noticed is every once in a while I'll get a barrel roll although it still hits true and I'm shooting at 28yds (length of my backyard where I shoot). I know it's a release issue because I shoot the same arrows constantly and they will fly true like darts and then out of the blue I get the roll. I have one each of a right hand and left hand helical clamp and I just ordered some of the Nuge blemished shafts from Big Jim so I'll try fletching those with a helical twist and see what happens. Thanks for the input even though this wasn't my post initially.
Most has been covered well. The spinning of the arrow, facilitated by an off-set or helically applied fletch, helps stabilize it's flight and resist influences to go off course. This is much like the spiral of a football, frisbee, etc.
One thing I'd add that I found out the hard way...if you are using single bevel broadheads they are either Right or Left beveled. You need to match this broadhead with your fletch helical or they won't compliment one another.