Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: MJB on August 12, 2007, 08:13:00 PM

Title: Nock Hitting Back Of Riser ?
Post by: MJB on August 12, 2007, 08:13:00 PM
I noticed while shooting today, two small gouges on back of the riser. I suspect brace height as the culprit. But don't know enough to say it's that, or my nock is to high or low.

THANKS,
Mike   :campfire:
Title: Re: Nock Hitting Back Of Riser ?
Post by: Srogers on August 12, 2007, 08:49:00 PM
On my black widow longbow that meant nock is too low.
Title: Re: Nock Hitting Back Of Riser ?
Post by: O.L. Adcock on August 12, 2007, 09:22:00 PM
Arrows too stiff (most likely), nock too low, arrow nocks too tight, brace height, any or all of the above...O.L.
Title: Re: Nock Hitting Back Of Riser ?
Post by: MJB on August 12, 2007, 10:14:00 PM
Thank You for the reply OL it is GREATLY APPREACIATED

Mike  :campfire:
Text only | Text with Images