Trad Gang

Main Boards => PowWow => Topic started by: Al Dean on September 13, 2012, 08:05:00 PM

Title: Bare shaft tuning question
Post by: Al Dean on September 13, 2012, 08:05:00 PM
Did a little bare shaft tuning this afternoon with the bow I just made, 25 yds, is this good enough?

(http://i248.photobucket.com/albums/gg175/aldean_photos/100_1327.jpg)
Title: Re: Bare shaft tuning question
Post by: rraming on September 13, 2012, 08:29:00 PM
Yep, even better of you can get a double, nice shots!
Title: Re: Bare shaft tuning question
Post by: maineac on September 13, 2012, 08:36:00 PM
I would say bare shafts are hitting the same place as the feathered shafts
Title: Re: Bare shaft tuning question
Post by: Medley on September 13, 2012, 09:05:00 PM
Not yet, but almost there. May have to resort to paper tuning!!! Lol
Title: Re: Bare shaft tuning question
Post by: JamesKerr on September 14, 2012, 12:49:00 AM
Now that is what you called being in tune! Nice shot too!
Title: Re: Bare shaft tuning question
Post by: WidowEater on September 14, 2012, 05:25:00 AM
Just dont put a flyer into one of those steel fenceposts.

Yeowww
Title: Re: Bare shaft tuning question
Post by: americanhunter7 on September 14, 2012, 05:31:00 AM
Alan I will be sending my bow and a few arrows out for you to tune in the next day or two!   :D   I'd say you're there    :scared:
Title: Re: Bare shaft tuning question
Post by: Steve Kendrot on September 14, 2012, 06:28:00 AM
I don't know.... Looks a little nock left!!   :biglaugh:
Title: Re: Bare shaft tuning question
Post by: Al Dean on September 14, 2012, 07:16:00 AM
Those steel fence posts have claimed way to many flyers.  Bt they do make you pay attention.
Title: Re: Bare shaft tuning question
Post by: MonRiver on September 14, 2012, 07:25:00 AM
Hmmm... If you keep tuning your arrows this way you may need to get some more!
Title: Re: Bare shaft tuning question
Post by: Roy from Pa on September 14, 2012, 07:40:00 AM
Those steel fence posts have claimed way to many flyers.  
LOL Alan, get a longer rope:)
Title: Re: Bare shaft tuning question
Post by: Roadkill on September 14, 2012, 09:52:00 PM
Accuracy comes at a price.  But you know that now, sorry I mentioned it