I know someone here has already figured it out- I want to try them
Ray...I glued on 9/32 snap on nocks over my adapters. You can cut off the tip and use Easton "G" nocks. I prefer the snap on 9/32....
I did some searching Ray and found this on 3Rivers' site:
Q:
Will any of these lighted knocks fit my "Arrow Dynamics-Traditional 55-70# tappered shaft arrows?
Asked on 12/13/2011 by Anonymous
Know the answer? Answer this question
1 answer
Staff Reviewer
A:
No, the Arrow Dynamics shafts taper back to 1/4". All of these nocks will be too large. I do not know of anyone that makes a lighted nock for Arrow Dynamics shafts.
Answered on 12/14/2011 by Justin from 3Rivers Archery
You can get Nockturnal Lighted Nocks in "G" size, and use Easton Uni-bushings. You would have to lightly sand the Nocturnal shaft ridges to get it to slip inside without undue pressure.
Ray,
Daryl nailed it. The Nocturnal G with uni bushings for the AD shafts. I have some and they work great. Raptor has the uni bushings for the AD shafts and you can order the Nocturnals from the Nocturnal web site.
Gary Hunsicker
3935 N.W. Menoken Rd.
Topeka, KS 66618-4514
785-246-4033
Call Gary...he has tried them ALL, ...he's an a Sponsor here that sells ADs....lease what was out last time I asked about them.
I have not heard of any lighted nocks that fit them.
I'm hoping to slip one of these in a Kansas buck in two weeks!
Thanks guys!
firenocks Ray! No switches or magnets. IMO I think they are the best...Blue with clear nockmor red with red nock..Extra long battery and gravity activated...been shooting for 3 years ...They have nocks to fit ADs. Good luck Kansas.
http://www.firenock.com/main.php?page=Productfitchart