Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: rlc1959 on September 01, 2012, 11:40:00 AM

Title: Dalaa Brace Height
Post by: rlc1959 on September 01, 2012, 11:40:00 AM
Bought some pieces here on Trad Gang. Checking to see recommended brace heights. I put the string on that came with my package and got 8" . This is a little more than I set my Long Bows at.
I have a Dalaa 17" riser and 3 Rivers Better limbs (foam) longs to make a 62" bow.

Thanks, Randy
Title: Re: Dalaa Brace Height
Post by: MikeS on September 01, 2012, 12:52:00 PM
I just got te 17" riser with foam core limbs for a 60" bow.  The book says 73/4-81/4"
Mike
Title: Re: Dalaa Brace Height
Post by: Bill Carlsen on September 01, 2012, 03:39:00 PM
7 3/8" for me.
Title: Re: Dalaa Brace Height
Post by: tradlongbow on September 01, 2012, 05:09:00 PM
The instructions say 7" to 7 3/4" for longbow limbs.

http://www.3riversarchery.com/pdf/DalaaOwnersManual.pdf
Title: Re: Dalaa Brace Height
Post by: BassBow on September 01, 2012, 06:40:00 PM
8 1/4"for me.
Title: Re: Dalaa Brace Height
Post by: arrowlauncherdj on September 01, 2012, 10:08:00 PM
Book says 7.5 to 8.5 I think for recurves.
Title: Re: Dalaa Brace Height
Post by: kestimator on September 01, 2012, 10:11:00 PM
I think that it is a personal thing.  When I had Dalaas around 8" was good for me.
Title: Re: Dalaa Brace Height
Post by: huntin_sparty on September 01, 2012, 11:18:00 PM
Longbow limbs have a lower bh recommendation than the recurve tradlongbow set you right with the manual.  Mine liked 7 1/2 with the longbow limbs.
Title: Re: Dalaa Brace Height
Post by: rlc1959 on September 02, 2012, 08:58:00 AM
Thanks guys. I have the recurve limbs. 8" seems fine after a couple times shooting. One week from MN Elk Trip I should not be tinkering. i put the Dalaa away and got my favorite ACS 3pc dialed in.
Text only | Text with Images