I came across some APC aluminum 1616 shafts without inserts or points. Is anyone familiar with these shafts and or what type of point will work? I want to set these up for m daughter. Thanks in advance!
1616.. is that even a possible shaft or is my understanding of shafts wrong
ericmerg - 16/64 outside diameter, 16 thousands thick. Yeah they're 1/4" arrows but don't know if they're still being manufactured? Inside diameter is .218 which you would have to have the correct insert with outside diameter .25. ********* may have inserts or ya may wanta contact Easton for inserts..... If I remember correctly they spine around 28 - 30#
I made some up for my grandsons and I put nibs target points in them.
Good idea, reddogge.
I believe the only thing available are glue-in target points or nibbs.They are too small a diameter for inserts.
Oh I didn't think of nibbs. I double checked and they are marked 1616. They should be the ticket if they spine in at #30. Thanks for the ideas.
How many you have and do you want to part with any?
They are still available and you use a 1616 point! You can order these from various sources. Excellent kids arrow; XX75 Platinum is available in 1616.
16 penny nail. Sorry I just had to say it.
Don't shoot milk jugs with them. Bend in a blink!
Killdeer
QuoteOriginally posted by Bjorn:
They are still available and you use a 1616 point! You can order these from various sources. Excellent kids arrow; XX75 Platinum is available in 1616.
I have them for my daughter, they are a bit pricey, check with an Easton dealer for inserts.