Just purchased some Easton full metal jackets without realizing they were the micro-diameter shafts.
Wanting to shoot 125 gr magnus heads on them; are there adaptors that will allow this?
Will they screw into your shafts if so they sell easton broadhead adapters that just makes transition from shaft to broadhead smoother. don't cost much.
I believe they use the same broadhead adapters as the Axis shafts, I may be wrong. Make sure you get the right size adapter for your FMJ's, different sizes for different spines.
3Rivers sells the adapter rings for Axis/MFX shafts.Or I've done with some 400 MFX is to foot them with a 1" piece of a 2018,made the end a 5/16" diameter.
Thanks for the replies