Trad Gang
Main Boards => PowWow => Topic started by: RecurveRookie on July 30, 2012, 06:24:00 PM
-
Gang, Apologies if this in the wrong place. My Arizona EZ Fletch (carbon straight, with a tiny offset) sometimes does good, sometimes not. Some of my arrows don't get a good offset and they won't spin or too much on one feather and it corkscrews. Then sometimes they come out perfect. I'm using Easton st excel shafts and 5" shield feathers. Thanks Everyone, Greg
-
you have to be very careful using the easy fletch and making sure that the collar is pressed on evenly and the same everytime. I found when I went to put the collar on and its not lined up I would spin the collar to find the grooves and it twists the tips of the fletching holders a little. You can use a marker or scribe the collar so you press it on straight everytime.
-
you have to be very careful using the easy fletch and making sure that the collar is pressed on evenly and the same everytime. I found when I went to put the collar on and its not lined up I would spin the collar to find the grooves and it twists the tips of the fletching holders a little. You can use a marker or scribe the collar so you press it on straight everytime.
-
I have recently switched from EZ fletch to wraps. I did a doz arras in under five minutes on my carbons. Now if they only did feather wraps.