Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: amazonjim on July 25, 2012, 11:39:00 PM

Title: heavy hunter stainless steal 100grain inserts
Post by: amazonjim on July 25, 2012, 11:39:00 PM
Will these fit a regular GT arrow
Title: Re: heavy hunter stainless steal 100grain inserts
Post by: JRY309 on July 26, 2012, 08:19:00 AM
Probably not,the heavy Hunter's nocks say for hunter shafts only.So I'm guessing if the nocks are different the inserts will different also,maybe I'm wrong
Title: Re: heavy hunter stainless steal 100grain inserts
Post by: saumensch on July 26, 2012, 08:23:00 AM
the Heavy Hunters have a 11/32" outside diameter, therefore the "lip" of the inserts is tapered from 11/32 at the shaft side to 5/16 at the point side. If you would want to use them in 5/16" shafts youd probably need to grind down that tapered lip.

P.S. Hope thats understandable.
Title: Re: heavy hunter stainless steal 100grain inserts
Post by: amazonjim on July 26, 2012, 12:07:00 PM
Thanks guys
Text only | Text with Images