Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Jacob Mortensen on July 16, 2012, 04:32:00 AM

Title: Buffalo Wood Grain or AGP?
Post by: Jacob Mortensen on July 16, 2012, 04:32:00 AM
Hey all

Hoyt Buffalo: which color should be chosen

Wood Grain or AGP?

and how is the finish/quality on the wood grain (is it under the fiber glass or like AGP film dipped)

anyone have closeup photo of the woodgrain

thanks
Title: Re: Buffalo Wood Grain or AGP?
Post by: Hot Hap on July 16, 2012, 02:34:00 PM
ttt
Title: Re: Buffalo Wood Grain or AGP?
Post by: LinemanARK on July 16, 2012, 02:49:00 PM
I got the AGP but if I was doing it again I would get the wood just my opion.  Mike
Title: Re: Buffalo Wood Grain or AGP?
Post by: sawtoothscream on July 16, 2012, 02:56:00 PM
I would go wood, black/ wood looks pretty nice together.
Title: Re: Buffalo Wood Grain or AGP?
Post by: mountain lion on July 16, 2012, 06:34:00 PM
I just got the  camo, and I really like it
Title: Re: Buffalo Wood Grain or AGP?
Post by: ckanous on July 17, 2012, 07:07:00 AM
I like my camo limbs better than the wood, wish they offered camo riser like the Dorado.
Title: Re: Buffalo Wood Grain or AGP?
Post by: reddogge on July 17, 2012, 08:41:00 AM
I prefer the wood and black. the finish is dull anyway so it doesn't need camo.
Title: Re: Buffalo Wood Grain or AGP?
Post by: 3R Shooter on July 17, 2012, 10:07:00 AM
Hoyt is going to be offering black limbs too.
Title: Re: Buffalo Wood Grain or AGP?
Post by: WRV on July 17, 2012, 12:36:00 PM
Like the wood myself....
Title: Re: Buffalo Wood Grain or AGP?
Post by: michaelschwister on July 20, 2012, 09:13:00 PM
I have the camo.  Plan to paint the riser OD green.  May paint the whole thing OD green.....
Title: Re: Buffalo Wood Grain or AGP?
Post by: Jacob Mortensen on August 21, 2012, 05:48:00 AM
My new hoyt buffalo arrived: my spec´s (FYI)

40#@28 62" (limb bolts bottom out) 41.4#@28

182fps 420gr arrow at my draw 29" (44.4#)

only minus: the black finish on the riser chips easy

has anyone experienced the same?
Title: Re: Buffalo Wood Grain or AGP?
Post by: C. Halstead on August 21, 2012, 06:01:00 AM
Have had both. Know I own one with camo limbs. I like them alittle better then the wood grain. TO each their own.
Title: Re: Buffalo Wood Grain or AGP?
Post by: reddogge on August 21, 2012, 11:12:00 AM
My riser has no chips in 1 1/2 years of hard use. I had a small wear spot on the corner of the shelf and I touched it up with flat black Rustoleam.
Text only | Text with Images