Print Page - Putting wraps on tapered shafts

Title: Putting wraps on tapered shafts
Post by: Pokerdaddy on June 21, 2012, 06:32:00 PM

Has anyone put wraps on tapered shafts, such as AD Trads? I'm wondering if the taper presents any issues with the wrap not seating properly, or if the taper is subtle enough to be a non-issue.

Thanks!

Title: Re: Putting wraps on tapered shafts
Post by: Irish on June 21, 2012, 06:39:00 PM

I put them on ADs, no problems.

Title: Re: Putting wraps on tapered shafts
Post by: Brad Arnett on June 21, 2012, 06:39:00 PM

I just did on some ad trad lites. I order all my single color wraps from onestringer at 1x10 and then just cut as needed. I found that the wrap cut to 7" worked great with the taper of the ad's.

Title: Re: Putting wraps on tapered shafts
Post by: Pokerdaddy on June 21, 2012, 06:43:00 PM

Thanks guys. I use Onestringer reflective wraps and it sounds like the 1"ers will work with with the Trad Lites.

Title: Re: Putting wraps on tapered shafts
Post by: JamesKerr on June 21, 2012, 06:44:00 PM

I don't think there is enough of a taper to make a difference.

Title: Re: Putting wraps on tapered shafts
Post by: JohnnyWayne on June 21, 2012, 07:49:00 PM

Here's a link to the pdf for the AD sizes :thumbsup:

http://www.onestringer.com/DOCS/AD.pdf

I've used them and it works best to use a mousepad to roll them on with, he makes awesome wraps :notworthy:

Trad Gang

Main Boards => PowWow => Topic started by: Pokerdaddy on June 21, 2012, 06:32:00 PM