Trad Gang

Main Boards => PowWow => Topic started by: turtle927 on June 02, 2012, 10:08:00 PM

Title: help with my ben person colt!
Post by: turtle927 on June 02, 2012, 10:08:00 PM

does any know the brace height of a 62 in ben person colt? thx alot!

Title: Re: help with my ben person colt!
Post by: Night Wing on June 03, 2012, 07:47:00 AM

Going way back in memory for me.

The 62" Ben Pearson Colt came in two different models depending on poundage and they were the 7070 and the 707 models.

The 7070 was sold up to 45# and the 707 up to 55#. The 7070's brace height is 7 1/2" to 8 1/4" and the 707's is 7 1/2" to 8".

Hope this helps you out.

Title: Re: help with my ben person colt!
Post by: SCATTERSHOT on June 03, 2012, 07:23:00 PM

I have one, a 707. 62", 47#@28". It's a beater, but a real sweet shooting bow. It likes a brace of 7 3/4". Good luck with yours.

Title: Re: help with my ben person colt!
Post by: Cyclic-Rivers on June 03, 2012, 08:30:00 PM

I start with most of my old Ben Pearson recurves at 7 3/4. never seem to have to move them from there!

Title: Re: help with my ben person colt!
Post by: turtle927 on June 03, 2012, 11:18:00 PM

thx.. i try it on 7 3/4!

i  also found this web site too! it has alot about ben person bow and MANY models specs!

 http://pearsonbow.stormloader.com/pearson.html