What's the scoop on this material and where to purchase?
I think you can buy some from Chad at LBR.I have made a couple 8190 strings for my bows.It's small diameter and very strong.I made them 12 strands with padded loop ends for a 50# and 57#.They are holding up great and very quiet on the bows I put them on.A Shrew Model T and Morrison Shawnee,both have carbon & foam limbs.A 12 strand is about the same diameter as a 8 strand D97,10 strand 8125 and a 6 strand 450+.So far I really like 8190,I plan on making some more for some of my other longbows.
Charlie
In the past, I've ordered directly from them. Great people to work with. Give them a call with any questions.
www.bcyfibers.com (http://www.bcyfibers.com)
With that skinny of the string does it not cut into your fingers?
John
I got mine direct. They told me the breaking strength was 76#'s. So I made mine 8 strand flemish.
MAP
BCY sent me a sample when it first came out earlier this year. I've tinkered with it and sent out test strings.
I like it. Tough, very low stretch/creep. Can't say it's a big improvement over 8125, but it's good stuff. I've got 9 colors now. If you want to buy the material, you can get it direct from BCY--I don't know of any stores carrying it yet.
For a comparison...original "Fast Flight" was SK65 Dyneema. Dynaflight '97 and 8125 are SK75 Dyneema. Dynaflight 10 was SK78 Dyneema. 8190 is SK90 Dyneema.
I've tinkered with 12 strands (very small string), think I like 16 better. Still a small diameter string.
Chad
As always great info Chad........
Good information guys. Thanks a ton!!! I'll check with BCY direct. :thumbsup: :thumbsup:
I have one on order from chad that should be here this week. Gonna try it on my Hill Bow.
QuoteOriginally posted by habujohn:
With that skinny of the string does it not cut into your fingers?
John
John, they are double served to fit the arrow nocks so the feel is exactly the same as any other string material on your fingers.
Hey John--it won't cut into your fingers. I have been shooting a 12 strand 8190, which is the thinnest I've personally left on my bow for any amount of time (test string, plan to bump it up to 16 strands).
Servings come in larger sizes, but the problem with putting a fat serving on a skinny string is it's much more apt to slip. Padding out under the serving usually doesn't look good--makes the serving lumpy, etc. Double serving the entire length adds double the weight in the most crucial point on the string. I only do it when absolutely necessary, but when there's no other feasable solution I'll put a serving and a half--double serve in the nock area, single serve the rest.
I can't say it feels just like a regular sized string (to me--YMMV), but it doesn't hurt my fingers. I use a cordovan tipped glove, which helps.
Chad
Chad,
You have a PM.
Bill
Thanks Chad for the update. I think I too would go with the 16 strand as I like the feel of a larger diameter string and really don't like the double serving.
Now I have a question on quietness. Is this new material quieter?
It's very quiet, at least on my longbow--almost hunting quiet with no silencers--quieter than any other material I've used on it. On recurves not as quiet (no surprise there), but didn't require any jumping through hoops or going to extremes to get them quiet--just basic tuning.
Chad
Chad I loved the way my bows shoot with 8125 but found if the bow was left strung up it would continue to stretch and have to have extra twists added.Is this the case with this new material.I am using ts plus now have you compared these 2 materials.Thanks heaps for taking the time to answer these questions as it is hard to get this sort of info in AUS.
Cheers KIM
Just tried to deal with BCY direct and was rejected because I'm not a dealer. Not happy!!
Must be a new policy. I know dealers are required to have a minimum order. My experience with them has always been great.
Chad
Unusual for 8125 to show much stretch--how many strands in your string?
8190 has even less than 8125--very little stretch or creep. It's comparable to 450+ in that department. I never used TS Plus--started to try it, but learned it was going to be discontinued so I didn't bother.
Chad
QuoteOriginally posted by Charlie Lamb:
Just tried to deal with BCY direct and was rejected because I'm not a dealer. Not happy!!
I dont buy huge amounts but about 3 or 4 hundred at a time usually 2 a year. And they wouldnt give me the time of day. All I use is Brownell now. They return emails quick and actually answer the phone
Charlie,
I went to BCY when I started making my own a couple years ago. I couldn't deal direct either but they directed me to someone else and they've had what I wanted. I just looked and they carry 8190. I'll send you a PM.
Wow...first time I've heard of anyone getting anything other than great personal service from BCY.
My experience was just the opposite--the Brownell rep. I spoke with (or tried to speak with) told me in no uncertain terms I wasn't worth their time and I should go through one of their dealers. BCY always treated me like a million dollar customer, even when I was just getting started--that's why I don't use anything but BCY materials, and haven't for years. That was a long time ago--the rep. I spoke with may not even be working there anymore--but BCY has never given me a reason to look elsewhere.
L82Hunt, if you ever want to give BCY another chance, let me know--I'll be glad to help.
Chad
Got my string from LBR today for my hill in 8190. Only was able to shoot a few arrows through my bow with it but I am very impressed at how quiet and quick it was. I am still letting it settle over night and will do the final BH set tomorrow and see how it does.
Chad I would call it creep I guess not really stretch as it is that the string gets longer if the bow is left strung all the time even when not being shot.If you take the string off and give it some time it seems to come back a bit in length if that makes sence.I make them 10 strands for my 60 pound bows.In Australia I could only get the 8125 in black but the ts in all the colours so I got a few rolls to try and like it.I think the 8125 may add a couple extra fps though.
Cheers KIM