Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: redlabel on April 13, 2012, 07:41:00 PM

Title: bowfishing points
Post by: redlabel on April 13, 2012, 07:41:00 PM
what does everybody use to glue on bowfishing points.  Thanks
Title: Re: bowfishing points
Post by: KHALVERSON on April 13, 2012, 07:45:00 PM
devcon 2 ton epoxy works the best for me
Title: Re: bowfishing points
Post by: carpsniperg2 on April 14, 2012, 02:44:00 AM
I do a lot of arrows each year. You want to use a epoxy with a longer setup time. Like 15 minutes or more. I like the 2 part stuff that sets up in about 30 mins.
Title: Re: bowfishing points
Post by: Scott357 on April 14, 2012, 11:16:00 AM
Must of the stuff I read recommends a cross pin too. You could make one out of a finishing nail
Title: Re: bowfishing points
Post by: The Vanilla Gorilla on April 14, 2012, 11:39:00 AM
I use JB weld with no crosspin.  My string will break or arrow will shatter or snap before the point pulls off.
Title: Re: bowfishing points
Post by: Zbone on April 14, 2012, 12:37:00 PM
Bowfishing points are getting expensive... Anyone got a how-to-make home brew?
Text only | Text with Images