Trad Gang

Main Boards => PowWow => Topic started by: Widow's Son on March 09, 2012, 04:16:00 PM

Title: Beman MFX classic weight
Post by: Widow's Son on March 09, 2012, 04:16:00 PM
My Beman arrows weight in at 481grs. I'm shooting a BW 46# at 28". I plan on hunting with a 125gr Woodsman Elite. In ya'lls opinion is this enough weight or should I use the weight tubes to bump up the total wieght. Using a 3gpi tube will get the arrow up to around 563grs.
Title: Re: Beman MFX classic weight
Post by: JJB2 on March 09, 2012, 04:23:00 PM
What are you planning on hunting?  Are you using 500's?  If you do want to go up in weight I'd suggest putting the added weight up front rather than using a tube.  You'll get more benefit in regards to penetration moving the weight up front.
Title: Re: Beman MFX classic weight
Post by: Widow's Son on March 09, 2012, 04:27:00 PM
I'm hunting whitetail deer. I'm sorry, I guess the animal I intend to hunt would make a big difference. LOL. Yes Sir, I am using the 500 shafts.
Title: Re: Beman MFX classic weight
Post by: doug77 on March 09, 2012, 04:47:00 PM
From one BW shooter to another bump your point weight up and forget about the weight tubes, you'll be much happier.

doug77
Title: Re: Beman MFX classic weight
Post by: Rod in SC on March 09, 2012, 05:00:00 PM
I shoot Beman MFX black 500s at 29.5 inches and 200 grain point.  I shoot a 51@29 PCH Widow. I bet you can shoot a lot more point weight than you think. Try 175, 200, 225, and 250 to see which shoots best
Title: Re: Beman MFX classic weight
Post by: Lippe on March 09, 2012, 05:35:00 PM
If those are flying well, I wouldn't change anything. I shoot the exact same arrow and it goes completely thru our deer. 480 grains is enough for deer imo.
Lippe
Title: Re: Beman MFX classic weight
Post by: JamesKerr on March 09, 2012, 06:47:00 PM
That's pretty close to 10 gpp. I gurantee those shafts will go straight through a deer.
Title: Re: Beman MFX classic weight
Post by: TxAg on March 09, 2012, 10:17:00 PM
That'll be fine on weight but you might be over spined. Wouldnt hurt to try a 150 or 175 gr head
Title: Re: Beman MFX classic weight
Post by: LimBender on March 09, 2012, 11:16:00 PM
MFX are one of the heaviest shafts out there, especially if you use the 50/75 grain HIT insert.  On deer, don't see any reason to add tubes and deal with movement and all that.  As others have said, just add point weight.  With the 75 grain hit, 125 tip and feathers, you should have a total weight around 500 gpi, which is plenty for #46.

In fact, one reason I didn't get MFX other than the small diameter was the fact that it is heavy and would make a 400 arrow with 250 grain bh and 50 grain hit total over 600 grains.
Title: Re: Beman MFX classic weight
Post by: CRS on March 10, 2012, 12:50:00 AM
10gpp and sharp broadhead in the right place will work just fine.
Title: Re: Beman MFX classic weight
Post by: Real Buckmaster on March 10, 2012, 09:44:00 AM
I would try the 175 grain and 200 grain point
I went to the heavier tip wts about two years ago and never looked back.  Our bow specs and draw lengths are pretty close.
Title: Re: Beman MFX classic weight
Post by: jackdaw on March 10, 2012, 10:43:00 AM
A 150 or 175 grain broadhead will give you a little more FOC, but you are already surpassing 10 grains of arrow weight to your bows weight. If you have good arow flight...let er' rip!!!!
Title: Re: Beman MFX classic weight
Post by: awbowman on March 10, 2012, 10:44:00 AM
What Jackdaw said.