http://www.sharpeningsupplies.com/DMT-Three-Stone-6-Diamond-Whetstone-Set-in-Hardwood-Box-P439C39.aspx
has anyone used these stones with the KME system and a Grizzly BH?
Yes
http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=2;t=000115
Jim I saw that in the how-to.... I was wondering if those hones are comparable to the one you used because the price isn't! Those 3 cost less then the 1 you showed....
The one I used is solid steel,diamond coated on one side ans 3"x8".I wanted the 3" width because of the Grizzly's length.The steel hones cost more.The Grizzly is 3 3/16" long and the stone you are looking at is 2" wide.They are a thin layer of perforated steel,coated with diamond and bonded to a piece of plastic.Not that they won't sharpen but two entirely different hones.
To be honest,you can do the same thing using various grits of wet or dry sand paper on a flat,true surface like steel plate,heavy glass,smooth ceramic tile etc.
I would start with 220 grit and go as fine as you want.I go to 2000 grit.With the new,improved grind on the Grizzlys,this should go pretty fast.