hi all anyone shot the extra long dryad longbow limbs on the onyx /recon risers if so what did the brace end up being and were they still quick thanks Ralph
Which of our longbow limbs are you looking at?
The Epic longbow will gain 2 pounds going to the 17 " TT riser and will brace at a little over 7".
The Legend longbow limbs both 4G and CG will also gain 2 pounds on the 17" riser and will brace at about 7 1/2 or so.
All of them perform well on the TT risers.
Mike
hi Mike thanks for the reply,i own a couple of onyx/recon risers which are forward handle didn't know how much that would effect brace and they are 15" as well!
7.5" would be perfect but the recurve limbs i have now brace at 8.5" plus.
i was mainly looking at the acs extra long longbow limbs thanks!
ACS XL will brace a bit higher. I don't have an onyx riser here to test but when you get the limbs set the measure at the end of the riser to about 7 1/4 and you will be in the sweet spot.
Mike
With the onyx/recon risers, the brace height will be higher. Papers that I got with my onyx riser said the the brace height would be between 7 1/2 to 8 1/2". Mine shot the best right at about 8" with the ******** longbow limbs.
thanks guys i was trying to avoid 10" braces
My Onyx riser liked 7.75" with the Dryad limbs I put on her. I have a medium set of statics and a set of longbow limbs and both liked 7.75"
thanks Brandon that sounds perfect were they quick,quiet?
how did the static recurve limbs shoot compared to the longbow limbs? faster,still quiet?