Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: LYONEL on January 25, 2012, 05:54:00 PM

Title: Broadhead with 23/64 ferrule?
Post by: LYONEL on January 25, 2012, 05:54:00 PM
Who does a two or three blade broadhead with 23/64 ferrule?
Title: Re: Broadhead with 23/64 ferrule?
Post by: lpcjon2 on January 25, 2012, 06:07:00 PM
I see you have two post on this.
Title: Re: Broadhead with 23/64 ferrule?
Post by: TOEJAMMER on January 25, 2012, 06:55:00 PM
Tuffhead is one who makes a two blade with a 23/64th ferrule.
Title: Re: Broadhead with 23/64 ferrule?
Post by: LYONEL on January 25, 2012, 07:11:00 PM
Sorry I must have doubled up some how?
Title: Re: Broadhead with 23/64 ferrule?
Post by: Swamp Yankee on January 25, 2012, 07:16:00 PM
Many that I've seen will fit either a 11/32 or 23/64 shaft.
Title: Re: Broadhead with 23/64 ferrule?
Post by: Mike Vines on January 25, 2012, 07:22:00 PM
Eclipse Broadheads.
Title: Re: Broadhead with 23/64 ferrule?
Post by: LYONEL on January 25, 2012, 07:53:00 PM
I think the ones that say they fit 11/32 & 23/64 are actually 11/32  & some of the taper sticks out the back as opposed to a proper 23/64 ferrule.
Title: Re: Broadhead with 23/64 ferrule?
Post by: SlowBowinMO on January 25, 2012, 10:35:00 PM
I believe the Hill is a true 23/64, but most archers use 11/32" with great results.  I don't care for 11/32" field points on 23/64 shafts, but broadheads have never been a problem.
Text only | Text with Images