Print Page - draw length?

Title: draw length?
Post by: 3Feathers on January 19, 2012, 08:11:00 PM

Anybody have a short-draw length?shorter than 26in.?If so how much weight are you shooting?

Title: Re: draw length?
Post by: Prairie Drifter on January 19, 2012, 09:20:00 PM

I'm right at 26". I shoot from 38# to 52#.

Title: Re: draw length?
Post by: shoothathang on January 20, 2012, 12:26:00 AM

I have a 25" DL,shoot a Damon Howatt X-200 45#@28",so I'm guessin' about 37ish#

Title: Re: draw length?
Post by: LONGSTYKES on January 20, 2012, 08:16:00 AM

I am a 26" draw and am shooting 44# @ 26" too 54# @ 26".

Title: Re: draw length?
Post by: fz4vgq on January 20, 2012, 08:55:00 AM

I have a 25" DL and shoot a 54" Shrew Classic Hunter 46#@25". Arrows are Beman MFX 600 cut to 28.5", 75gr H.I.T. insert, 125 point. Total arrow weight of 450 grains, 20.5 F.O.C., 9.7 GPP.

Title: Re: draw length?
Post by: RonD on January 20, 2012, 12:18:00 PM

I shoot a recurve 43#@25". I use a 1816 aluminum arrow with three three inch feathers, and 185 grain two blade Zephyr broadhead or a 247 grain two blade Ace Super Express.

Title: Re: draw length?
Post by: awbowman on January 20, 2012, 12:40:00 PM

I am about 26" and my Custom Bighorn bow is rated 48#s at 26 1/2"

I also have a 58" Thunderstick Mag rated at 53#s at 28". So about 48#s at 26" I would say

Doesn't really matter to me what it pulls, I LIKE THEM BOTH and have confidence they will get the job done.

Title: Re: draw length?
Post by: Stump73 on January 20, 2012, 01:09:00 PM

My draw length is 25". I have Bear Grizzly 58" 50@28. Probably about 42lbs @ 25".

Trad Gang

Main Boards => PowWow => Topic started by: 3Feathers on January 19, 2012, 08:11:00 PM