Trad Gang

Main Boards => PowWow => Topic started by: joevan125 on January 06, 2012, 06:57:00 AM

Title: Win/Carbon foam make 50lbs on 15in riser what about 21in
Post by: joevan125 on January 06, 2012, 06:57:00 AM
A.S. has a set of  Win-Win limbs that i believe are 66in. Anyone know what length and poundage they would maks on a 21in Dalla riser.

Thanks

Joe Van
Title: Re: Win/Carbon foam make 50lbs on 15in riser what about 21in
Post by: katman on January 06, 2012, 06:51:00 PM
62" on a 21" riser, they are marked for a 25" riser from the factory. You would gain four pounds from the limbs marked weight on a 21" dalla.

On the 15" riser IF the limb pad angles are the same the 1# per inch rule applies, that is going up 6 inches in riser length yields a 6 pound loss. Unfortunately not all risers are made with the same limb pad angles, gets confusing.