Trad Gang
Main Boards => PowWow => Topic started by: redeemed on January 14, 2007, 09:04:00 PM
-
I have 2 monarch lb's. first one is 64" 60#. has (i think) woolies. made @ 1993 by monty,not a real STRONG r/d shoots quiet all i hear is a little bump upon release. second lb is 06 model 66" 57# has some for fur,little more r/d than my older one,has a twang upon release. shoot 2117's out of both,trad. 2 fing. under draw. Can't figure out why the new one is louder,will a different string help,i don't want to hang 1000 different types of silencers on this bow.HELP :banghead:
-
Brace may need to be a tad higher. I find D-97 and 8125 and such to be quieter than B-50 on my bows. If ya add anything some rubber catwhiskers are tough to beat and also some wool from sheered sheep is hard to beat as well. Shawn
-
First, I think you need to determine what kind (ff or dacron)of strings you have on the two bows. If they are flemish twist as I assume they are, find a small strand protruding from the splice area and try to cut it with a pair of scissors. If it cuts, its dacron if it slides between the blades but wont cut, its a ff type material. If you cant do that measure the string off the bow pulled snug, then measure the string on the strung bow. If its dacron the difference might be 3/4" or more, if ff it will be near the same.
A dacron string might require a higher B.H.