Guys,I know all the rage is short bows whether recurves or longbows, so with that said my question is in regards to recurves specifically. Most of the recurves bowyers build are in the 60 to 62 inch range. What is the average length most of you are shooting and what is your draw length? My 2nd question is in regards to total physical weight of the bow as I am used to a lightweight bow in either one piece or takedown recurves? I am a diehard longbow shooter but earlier this year broke my wrist badly and it is giving me enough problems that I cannot shoot my longbow over 10 shots without alot of discomfort. So I may have to move to a recurve to try that and see if it makes any difference if not I do not want to think about the alternative. I appreciate all the replies. By the way I can tell you my favorite recurves I have been looking at are Bruins, Rose Oak, Schafers, and Tall Tines. Never have shot any of them though.
I have found that I like a 60" recurve & I have 3 well maybe 4 if ya include the extra set of limbs.
Weights are measured to my draw length.
Zona Custom T/D Recurve #24 60" 49# @ 27"
91' Sky Sky Hawk 60" 47# @ 27"
Same Sky Hawk w/ 56# @ 27" limbs
Zona Custom T/D Recurve #46 60" 36# @ 27"
I have 60" 62" and 64" recurves.
My draw is 29".
I prefer the 64" bow over the two shorter lengths.
John
64,66, are my average takedown or one piece preferred length recurves. Short bows are far from the rage for me, I just cant shoot as accurately with them as I do with longer recurves. I wish I could, but its like night and day for me.
. Draw is 29". Shoot anywhere from 48# to 76# depending what I'm going after. Favorite draw weight is mid-fifties for general shooting/hunting.
if you have to go to a recurve is it because of the grip, if so they do have longbows that have the recurve type grip,
Howler, maybe that and the weight of the overall bow for less vibration.
Flint,
I've missed seeing you! Sorry to hear about your injury.
I draw 29", and my favorite hunting bows are 58"ers. I have longer and shorter, but 58" seems like the perfect compromise between accuracy and clearance for me. I killed my last half-dozen deer with 47#@29".
If business ever brings you up this way again, get in touch. I have an interesting "rehab" bow you could use for a while that might help you work through the puzzle of what is best for YOU!
Daryl
62-64" length, #40-45, ILF set-up, mine DAS
60-62" recurves with a 30" draw. All my recurves have been 62". I've tried a some short bows, recurves and lb's but found the longer ones to be much more forgiving and accurate. I do have a 60" Dorado which I actually love shooting ........I didn't expect to like this bow that much...but I do. All my custom recurves now are 62"
Take a look at Chek-mate and Cascade. I've had a bunch of Chek-mates and for the money there's no better bow.
I to have wrist and elbow problems. Switching back to a recurve has helped. A different grip and more physical weight of the bow I think is what has made the difference. I love my longbows but cant shoot them for extended periods of time. I like 60 or 62in. recurve takedown models. I have 27in draw and shoot 50-55lbs.
Two 56" Custom Bighorn Recurves, 48#s 26.5" DL.
One 58" Thunderstick Mag r/d longbow, 48#s at 26.5"
I hunt tight areas and need a short bow
I have a BW PSAV 46#@28, the bow is 60" and I draw 30" and it seems pretty smooth all the way! it is my first recurve since a long time, and quit like it!!
my fav's are 62" in recurves and 64" in longbows at a 28" draw.
I draw 29-3/4" and shoot a 30-1/2" BoP arrow.
My two current main shooters (both one-piece recurves) are:
62", 52#@28" and a physical weight of 3 lbs 0 oz (or about 56# at my draw).
58", 51#@28" and a physical weight of 2 lbs 0 oz (or about 55# at my draw).
There is no reason you should have to go to a recurve limb to get smooth drawing, smooth shooting bow. There are some fine shooting hybrid long bows out there that are dead in the hand and very user friendly.... as a matter of fact i know a guy that builds them. :readit:
The over all length of a bow isn't what makes it smooth drawing, or dead in the hand. The string angle plays a huge part in it, and the getting a good limb balance to your pressure point does the rest..... there's a bit more to it than that.... but you get the idea.
Yep.
I prefer 66" length recurves and I have a 30" draw length and this bow length combined with my draw length eliminates "finger pinch" which I simply can't stand. :mad:
Some bowyers will build a 66" recurve, but they do so with a 21" riser. I prefer a 66" recurve with a 19" riser and 23.5" length limbs. I get more fps in arrow speed with the shorter riser.
BTW, both of my recurves are take downs. I've never weighed each bow, but I like the added weight of a take down over a one piece. It helps to steady the bow while aiming in a good stiff crosswind.
Night Wing,
I'm having tech problems with photo bucket right now so i cannot post a good example, but i have a 60" r/d long bow that will draw to 32" with a better string angle than a lot of 66" bows out there.
the string angle is determined by where the "Working limb" is located. most D shape and mild R/D long bow limbs load more evenly along the full length of the limb. With out any reflex to the tip, it requires more length to get a better string angle.
With recurve limbs, and hybrid bows alike, the working limb can be manipulated through the use of different taper rates in the core, and shifting tip and butt wedges to bend further out on the limb creating a lot milder string angle.
Depending on the design, and the geometry used. You can take an identical 60" bow and make it draw so it stacks up at 26" or 32".
My draw is 29".I've always liked short bows but have never been able to shoot 54" and shorter bows well.My all time favorite length is 56".These days,I like a lighter physical weight bow though over the years,I've owned a few heavier riser recurves.I own 2 Mojostik recurves,56",and they are light,smooth drawing and about as vibration free as a bow can be.The physical weight is 1 lb 5 oz.
(http://i10.photobucket.com/albums/a140/jbrandenburg/Mojostik022-1.jpg)
Hey Jim, That is a perfect example right there. looking at those tips at brace i'll bet she comes back to 30" pretty smooth too. :thumbsup:
My draw is 26" (I'm 5'6"). I only shoot recurves(aesthetics more than anything else).
My bows range from 56"-62". Most of my curves are 58". Even at my short draw I think the longer 60-62" curves are more comfortable (smooth drawinig) for me. I prefer a heavier bow so I'm drawn to mostly takedowns and somewhat beefy risers. My favorites are Habu, Schafer, Rose Oak, Widows, and Bear TDs.
I've found the LH bows are far smoother to draw and prettiest to look at. (sorry)
If someone asked me what would be the easiest bow to put their hands (no long build time and not the most expensive) one that is smooth, great grip, and high performance I would refer them to the Widow PA (one-piece). I have a PAX in 58" and it is sweet!
QuoteOriginally posted by Kirkll:
Night Wing,
I'm having tech problems with photo bucket right now so i cannot post a good example, but i have a 60" r/d long bow that will draw to 32" with a better string angle than a lot of 66" bows out there.
the string angle is determined by where the "Working limb" is located. most D shape and mild R/D long bow limbs load more evenly along the full length of the limb. With out any reflex to the tip, it requires more length to get a better string angle.
With recurve limbs, and hybrid bows alike, the working limb can be manipulated through the use of different taper rates in the core, and shifting tip and butt wedges to bend further out on the limb creating a lot milder string angle.
Depending on the design, and the geometry used. You can take an identical 60" bow and make it draw so it stacks up at 26" or 32".
Kirkll,
I've looked at your bows. I've seen your bow designs. If I recall, I think I've seen you shooting your recurve bow in a YouTube video. I could be wrong on that, but I don't think so. If it was/is the correct video, your bow was very quiet upon arrow release too.
It's too bad you live in Oregon and I live in Texas because I would like to demo shoot your 60" recurve in a light poundage recurve, say, 40# at my 30" draw length. Maybe one day I'll run into another Trad Ganger where I live in Texas who has your recurve close to the poundage and length requirements I like and he'll allow me to demo shoot it.
BTW, lots of excellent custom bowyers come from the state of Oregon. ;)
I really like 60" recurves, and draw 29"
Bill
I am only 5'7" and I draw 29.5 inches. I just can not shoot most 60inch recurves. I prefer 62 inch and probably would like a 64 inch bow. I feel the same way about hybrid long bows. I prefer 64 inch over 62 inch. Currently I have a ACS CX 64inch and a Welch Dakota Classic 62inch. Rick Welch recurve has a very heavy riser for stability. When I elk hunt, I prefer to carry the lighter A&H longbow. The recurve has some weight to it, about 3.5 lbs at least.
I've been shooting a couple of well made reflexed longbows, and they shoot smoother and more softly than my recurve at same poundage. Didn't catch your draw length in your post; I draw 27" and find 60" comfortable and forgiving in a longbow, 58" quicker and more maneuverable, still accurate and easy draw. My recurve is an old Wing, 58"... shoots hard and fast, not as smooth as the R/D's, but a tad bit faster.
I have a 62" recurve, had a 65" longbow, and now a new Super Grizzly. Wasn't too sure how I would like the short 58" length, but I love it. It is a 55#er and draws smooth as butter, and my draw is just a whisker shy of 30".
I have a 60"1PC Great Plains recurve at 53# at 28" but I pull just over 29". Doesn't stack and shoots great for me. Just picked up a Bear Kodiak TD this summer same length. Same results with some stacking. Next bow I am ordering is a Great Plains Texas Long Curve that will be 62". Bill Forman suggested this length if drawing over 28".
You could probably have a chance to shoot bows by all the bowyers you mentioned and many more in January if you go to the Kalamazoo show.