Have had 2 metal riser[Buffolo and Titan] bows and sold both due to thinking they were not as pretty as my wooden riser bows. They were both great shooters.After buying and selling a bunch of bows[appox. 40] I have 3 recurves[Dye] and 2 longbows[Hummingbird] that to me are the best looking and preforming wooden bows I have shot.Now am going back to a metal riser bow for hunting, as my wooden bows are too valuable to me to scratch up in the woods.Since I spend 10 months shooting 3-ds and stumping with my friends and only 2 months hunting that is the best choice for me.Even though the metal risers look like some leafspring from under a boattrailer.
Anyone else hunting with metal risers for this reason?These bows are almost indestructable.
...whats so wrong with a a bow that has "battle scars" Its a bow with so many story's! Let'm live. Bows that sit in the bow rack..loose value in such many other ways. think about that. Just do your best to keep them safe.
I head deer think metal risers are ugly too and won't come in to check them out (of course, they didn't check out my wood bows much this year either).
I am thinking about going to a metal riser for next year. I use to have a generation 1 Das and I wish I would have never sold it. Bob
I have a Black Swan Impala with a metal riser...I've had the whole bow dipped in Predator Deception Green though so it's real pretty now......you might consider that.
How are the metal risers in the cold? Would there be any diference than wood as cold is cold?
Stoutstuff
I hunted with a metal Strickland "Stick" last season. Did well with it and it is a shooter. However, I want to hunt with my woooden riser bows.
I'm hunting with a beautiful Habu this season. I just try to be careful (how can a rock be in the leaves in the dark EVERY time I put that bow down to open a gate!).
QuoteOriginally posted by getstonedprimitivebowhunt:
...whats so wrong with a a bow that has "battle scars" Its a bow with so many story's! Let'm live. Bows that sit in the bow rack..loose value in such many other ways. think about that. Just do your best to keep them safe.
Thanks for your comment I feel better about my bow battle scars now :bigsmyl:
Had A Quinn (sold it).It was a great bow,very dead in the hand.
I buy my bows to use non admire, the first ding is the hardest to take after that they come easy. Why save a bow for looks? so someone else will use it when your gone?
With few exceptions I have been shooting metal risers for hunting since Groves came out with one in the 60's. Have had metal Widows and currently shoot a DAS with ILF limbs. Best bow for both worlds.
Guess what...my wood riser bows have proven over 25+ yrs. that they are indestructable :thumbsup:
My bows are tools, finely crafted custum tools at that, but just tools...they get beat up!
I would never think of having a bow that I wouldn't use to hunt with, for the reason of keeping it from getting scratched :archer2:
I'm a hunter...not a collector...
very interesting...............
I may look into having my riser dipped. Once thought of applying veneers to the metal as a joke to my Trad friends. Will put a piece of Tennis Raquet wrap on the grip if the cold bothers me.
Will continue to shoot my wood riser bows every day when not hunting, Roy
I have ordered one "fancied up" bow in my life and will never do it again. That bow was so cool looking I was always worried about messing it up when I took it afield. Not any more! If i can't take it to the woods without worrying about possible little scratch or ding then I won't buy it. Besides, that is why bowyers refinish bows.
Bisch
QuoteOriginally posted by Guru:
Guess what...my wood riser bows have proven over 25+ yrs. that they are indestructable :thumbsup:
My bows are tools, finely crafted custum tools at that, but just tools...they get beat up!
I would never think of having a bow that I wouldn't use to hunt with, for the reason of keeping it from getting scratched :archer2:
I'm a hunter...not a collector...
I wasted my time typing in the post above! Curt said it all in his post and I agree wholeheartedly.
Bisch
I'd love to shoot wood bows all the time, but I am shooting my Greenhorn Belgium target bow right now. Got 56# limbs on it, its just WAY easier to be accurate with than any wooden bow. If I'm not on accuracy wise, I wont shoot. I have not put enough time in to be honest due to work, so I picked up my Greenhorn recurve. Spot on right from the first shot, I have camo limbskins on it cuz its bright blue. But I've taken some really nice deer with it.
I dont mind scratches on a hunting bow, if they get too bad, a refinish is easy.
I'm with Curt , it a tool ! To put arrows down range ,so shoot what you shoot the best just remember it a tool .
I hunt with wood risers because that's what shoots BEST for me. Had a few metal risers, not as pretty, and I just didn't shoot them as well. It is nice to admire the uniqueness of the wood during the down time on stand. A good finish seems to go a long ways toward how well bows hold up under hunting use. Plus as mentioned, you can always dip or refinish them.
I shot a PSE Coyote for a few years and liked it. It used an arrow rest and I could put a stabilizer on it if I felt like it; isn't the most traditional bow out there. The arrows flew straight (carbon bemans) and the bow was quiet. It made a good bow to use to hit flying asian carp on the river, not that I was all that good at that but it worked when I did my part. It wasn't expensive and it took a beating well; kind of wish I had it back.
I'm stickbowless now and looking for a new bow, but I really think I am going to get something like a Mohawk or some other wooden longbow. Still looking and getting some money together. The metal bows are fine, but this time I want something more traditional and I like the look of wood bows much more than any metal bow out there.
Agree with Guru 100%. They're tools. Almost every bow I acquire promptly gets a 1/8" hole drilled in the side of the riser for an arrow holder. Functionality is the name of the game!
I prefer metal. But then again I also like to shoot vanes off a flipper rest with a plunger.
I think you should shoot what you like. I shoot both and enjoy them.Both work fine. I don't beat up my bows,but use them. When you hunt you are bound to put some marks in them.I shot cold compounds for years and I am still here to talk about it. Right now I am shooting wooden longbow for hunting and having a blast.
I thought my Wapiti longbow was the best bow for me until I bought a Hoyt Dorado. I like how I can adjust the sideplate for accurate tuning and it performed flawlessly when I took my first buck. It might not be the prettiest bow but it sure is accurate. Its virtually bomb proof.
I shoot and like the variety of ways I can setup my metal risers (Daala, TAC firefly) with dryad longbow limbs. The daala has a plastic/rubber grip which can be changed out from high to extra low. The TAC a rubber grip.In front of the grips of both I cover the metal with velcro so my hand & fingers don't touch the metal. I personally like the looks of either bow and the risers are pretty much bombproof.
QuoteOriginally posted by getstonedprimitivebowhunt:
...whats so wrong with a a bow that has "battle scars" Its a bow with so many story's! Let'm live. Bows that sit in the bow rack..loose value in such many other ways. think about that. Just do your best to keep them safe.
Amen! I only really shoot 1 bow now and while I try as hard as possible to keep it from getting scatched up, I know it will as anything that you use will. A bow is a tool to me although I would consider my longbow my most important and loved tool. It is there to be used. If I wasn't going to shoot it and hunt with it I would never have bought it.