Trad Gang

Main Boards => PowWow => Topic started by: 3Feathers on October 29, 2011, 09:32:00 AM

Title: aluminums?
Post by: 3Feathers on October 29, 2011, 09:32:00 AM
How many still use aluminums for there hunting arrows?What is your set-up and arrow weight?
Title: Re: aluminums?
Post by: Dave Paradowski on October 29, 2011, 09:45:00 AM
Holm-Made Osprey, 60", 44# @ 28"
29" 1916's, 3-4" shield feathers
125gr.two blade Magnus Stingers
Total weight, 500grs.
DaveP
Title: Re: aluminums?
Post by: stagetek on October 29, 2011, 10:16:00 AM
Bear Super K.'s and Predators. 48 - 51 lbs. 31" 2018's, Three 5" fletch. 125gr. Snuffers or Magnus II's.
Title: Re: aluminums?
Post by: Widow's Son on October 29, 2011, 10:39:00 AM
I still shoot aluminum's out of my Black Widow. 46# @ 28".  28 1/2" 2020's, three 5" fletch, 125gr Zwickey Eskimos. I've been out of traditional archery for a while and didn't realize that almost all Easton shafts now used the uni-bushing system. I'm not a big fan of this system but it seems that they still offer the traditional nock taper on their legacy shafts.
Title: Re: aluminums?
Post by: stujay on October 29, 2011, 11:14:00 AM
#45 ILF longbow setup, 29" 2016"s 150 gr tips. Arrow 505gr. Broadheads Magnus Stinger 2 or 4 blade (150 gr). I have carbon arrows also but prefer the aluminum's. My 2016's are easton's xx75 camo hunters and legacy's. My preference is the Legacy's.
Title: Re: aluminums?
Post by: BOWMARKS on October 29, 2011, 04:17:00 PM
Thats all I shoot #43 Morrison R/C.  
28" 1918's  shaft.  
175gr VPA broadhead  
560gr total shaft.
Title: Re: aluminums?
Post by: dave19113 on October 29, 2011, 04:23:00 PM
Buffalo Bow 67 @ 27

2018's cut to 28", 250 up front 3 5" feathers 640 gr

2219 cut to 28" 300 up front, 3 5" feathers


Buffalow Bow 58# @ 26"

2018's cut to 28" 250 up front, 3 5" feathers 640gr
Title: Re: aluminums?
Post by: ksbowman on October 29, 2011, 06:04:00 PM
57# to 64# @ 29 1/4" depending on bow. Arrows cut to 30 1/4". Zwickey Eskimos 165 gr. w/insert. 2215's total weight 565 gr. arrow.
Title: Re: aluminums?
Post by: bear1336 on October 29, 2011, 06:07:00 PM
Bear T/D A riser #1 limbs 44# 1916 @ 28in 100gr magnus
Title: Re: aluminums?
Post by: rdoggsilva on October 30, 2011, 01:56:00 AM
Samick Sage 45# @ 28" shoot at 28.5". Arrow length 29.5. 2117 with 175gr head.
Title: Re: aluminums?
Post by: barredfeather on October 30, 2011, 08:16:00 AM
Rose Oak King Panther, 47# @ 28", 2018 Daugherty Super Naturals, 28 1/2" with a 160 grain Ace Standard, and 3, 5 1/2" feathers.  Hair under 600 grains including adapter and insert.

Jerry
Title: Re: aluminums?
Post by: jimneye on October 30, 2011, 08:16:00 AM
28" 2117 with 175 up front out of a 26 lb PSA II
Title: Re: aluminums?
Post by: SL on October 30, 2011, 08:32:00 AM
29" 2219's with 175 grains from a 64lb @ 27 inch brack quest. Not sure how heavy.
SL
Title: Re: aluminums?
Post by: dirtguy on October 30, 2011, 08:42:00 AM
45#  draw

29" 2016s xx75 with Magnus stinger 125s.

Total arrow weight at about 440 grains
Title: Re: aluminums?
Post by: Three Finger on October 30, 2011, 09:35:00 AM
48#@28 recurve, with 2114 cut to 28in with 200g with inserts Grizzlies up front.
Title: Re: aluminums?
Post by: Night Wing on October 30, 2011, 05:02:00 PM
I've always used aluminums when shooting trad bows. There easy to tune to a bow.

My present aluminum arrows I'm shooting are in my signature.
Title: Re: aluminums?
Post by: Covey on October 30, 2011, 05:09:00 PM
54# at 28" Silvertip I draw to a little over 30". I shoot 2117's full length with a 125 muzzy. I prefer aluminum, fly good and there cheap!

Jason
Title: Re: aluminums?
Post by: Downtime on October 30, 2011, 06:19:00 PM
2016  30" 125 ace standard, glue in adapter

45# recurves, draw 29.25'
Title: Re: aluminums?
Post by: Outwest on October 30, 2011, 07:32:00 PM
2117 31" 125 grain head. I draw 29" they work in all of my bows 52# to 58#
Title: Re: aluminums?
Post by: JDunlap on October 30, 2011, 10:02:00 PM
2213 gg, 29.5" with 3-5" feathers, 200gr two blades; shooting out of a 56@28.5" Sandy Biles recurve and a Don Dow Stik; Arrow weight 550grains. The best flight I've been able to find.
Title: Re: aluminums?
Post by: TRT on October 31, 2011, 06:10:00 AM
I shoot a 50lb @28" Martin Hatfield.  I draw 29.5'' and my arrows are 2117 cut to 30.5 with 125grains up front.  I shoot 5.5"x3 feathers or 5"x4 feathers.

I have been playing with 2216 cut to 31" with 125 grains up front and 5.5" x 3 feathers.

Both fly well for me...when I do my part!
Title: Re: aluminums?
Post by: **DONOTDELETE** on October 31, 2011, 04:53:00 PM
53# @ 29" , 2016 29" , with 160 grain woodman up front. this was last years set up, but i sold the bow..... Still got the arrows though.   :bigsmyl: