Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: PAUL A. JOHNSON on July 11, 2007, 10:28:00 AM

Title: question about an Indian Archery recurve bow
Post by: PAUL A. JOHNSON on July 11, 2007, 10:28:00 AM
I'd like to know if anyone can tell me the recommeded brace height, nock height is for a Indian Archery 62" 45# recurve.
THANKS
PAUL
Title: Re: question about an Indian Archery recurve bow
Post by: Deadsmple on July 11, 2007, 04:58:00 PM
Paul, I have a 35#  62" Indian Archery bow that likes 7 6/8" brace height. If someone that knows better doesn't say different I would start around there.
Title: Re: question about an Indian Archery recurve bow
Post by: peak98 on July 11, 2007, 10:38:00 PM
ttt
Title: Re: question about an Indian Archery recurve bow
Post by: PAUL A. JOHNSON on July 12, 2007, 08:29:00 AM
TTT
Title: Re: question about an Indian Archery recurve bow
Post by: adeeden on July 12, 2007, 04:36:00 PM
I have a 62" senecca 45@28. It seems to like 7 3/4 best.
Title: Re: question about an Indian Archery recurve bow
Post by: SOS on July 12, 2007, 06:01:00 PM
Paul,

Those are good numbers on brace height.  As to knocking point are you shooting aluminums or carbons?  Split finger or 3 under?  Probably start around 3/8 of an inch up.  If you  have a bare shaft shoot it a few time.  If the arrow hits pretty level, you nock height is pretty close.

Sounds like you bows came in the mail...like Christmas, eh?

Steve
Title: Re: question about an Indian Archery recurve bow
Post by: PAUL A. JOHNSON on July 13, 2007, 09:34:00 AM
IT WAS A GREAT DAVE STEVE. NOW I'M JUST WAITING ON THE CORRECT ARROWS TO COME IN AND MY HEIGHT TOOL AND I'M READY TO START TUNING. I'M SHOOTING CARBON ARROWS AND SHOOTING SPLIT FINGER. THANKS FOR ALL THE HELP GUYS.
Text only | Text with Images