I don't know if this belongs here. I just wanted an opinion or two on how to align two blade broadheads. In line with the cock feather or 90 degrees to the cock feather? Or does it even matter? My arrows are straight fletched. Also, when using carbon shafts with inserts, can I warm the insert with hot water to soften the glue enough to turn it?
Any help is much appreciated as I'm new to trad archery.
Dave.
I doubt if it matters.Some mount them horizontally,some vertical.When I started,the theory was,the horizontal blade affected things less when going through paradox.I still mount mine that way because I'm used to that "sight picture" for lack of a better term.
Hot water isn't enough heat to soften epoxies.I don't like heating carbons at all.The best way for me,is get it done when gluing in the insert OR use a glue in broadhead with adapter and line up the blades when screwed into the shaft and gluing to the adapter.
Turn them til they look the best in you sight picture when drawn. I have noticed no difference in flight. Mine are diagonal.
Rob
Thanks for your help. I have mine mounted horizontally, but a couple didn't line up. They have adapters so I'll be able to heat them with a small flame and twist them around without hurting the shafts.
Deer season starts in a couple of days. I can't wait. New bow and looking for my first archery kill.
Dave.
I barely even notice the arrow or the broadhead when I'm shooting since I'm concentrating on what I want to hit. I shot one of my new broadheads the other day at about 15 yards and hit the exact spot I was looking at.
I really love shooting my longbow!
Dave.
I like my 2 blades aligned with the nock slot. Not so much for flight, but more so the broadhead doesn't block my view.
My three blades are aligned with the feathers.
Either way if they don't spin perfectly true they will not fly consistently. IMHO
With well tuned shafts, there has been no discernable difference for me.
I position them as to not obstruct my site window.
Thanks everyone for your help. My arrows are all aligned and spin tested on a jig I built this afternoon. All I need now is a buck to shoot. :archer2:
Dave.
With my split vision aiming method, I prefer my 2 blade Zwickeys horizontal. When I use Snuffers, I align them in a "Y". Just personal preference.
If your arrows are properly spined and tuned for your bow, you should be able to align the broadheads any way and they should fly straight. I would suggest full helical feathers instead of straight. More rotation to help stablize.
With 2 blade broadheads, I've always mounted mine horizontally. With 3 blade broadheads, I just screw them them on go since I never see my boardheads when I draw, aim and release.
I mount mine in line with the nock slot, then use the back of the broadhead at my finger as a drew check.
horiz. prevents me from acidentally overdrawing and cutting myself.
mine are at a 1 o'clock/7 o'clock, but thats just because of how my buddy lined um up and i'm used to shooting them that way. Personally i like it too, hits the shelf at full draw like a check
I always mounted them horizontally. This year I bought some 2-blade heads already mounted to an adapter. I just screwed them on and they ended up positioned randomly. They all flew perfect but I couldn't help but see them in my sight picture. Drove me nuts.
I turned each one to horizontal and all is well with the world again. :)
try flat-down,45degree angle, and straight up and down. shoot all 3 then find wich flies best.
Ive experimented a little with this and I think a vertical alignment helps the arrow recover from paradox a tiny bit better and it is easier, for me at least, to aim. A horizontal alignment seems to bounce off the riser to me but maybe Im over analyzing.
I use a small rubber O ring to help align my heads vertical...slip one on and then screw the b-head to desired way you like...I also use a small 5grain washer against the insert to help align and compress the O ring...works for me
Yep, set mine up as Razorbak desribes. With that rubber o ring gives alot of adjustment leeway.