So I feel a bit cheated after buying my bow. The felt on the shelf came unglued and was making it dangerous to shoot. Im soon going to replace that but the man I bought my bow from didn't even mention tuning my bow! I let him know ahead of time that it was my first bow and I hadn't been shooting long at all. The guys has a bad rep around town from what I've heard but he was the only place with a recurve, but ill be ordering most of my equipment online from now on.
Rambling aside, im curious how to check what may need to be adjusted. Im thinking the only real adjustment could be the nock point. I haven't been able to shoot accurately consitently since the felt came off. It my just be in my head but I think I need to make adjustments as well.
You need to find some local, experienced, trad guys to help you through this. It will save you a LOT of headaches.
Bisch
I suggest you find a knowledgable mentor... asap
If you don't know what you are doing, don't go and blame the seller or builder at this point. Find someone to help you like the others have suggested. Nothing worse than going into something and expecting to figure it out all on your own.
Brace height and nock point need adjusting mainly sometimes tiller if possible with your bow.
If you removed the felt with wear versus crappy product you may have nock height issue causing premature wear. PM me which shop you bought it from. Ive only been shooting 2 years trad and a lot of my learning had been from here and doing things trial and error.
Check the A&H Archery link and they have a great link to bow tuning that got me started.
Start your brace hieght around 71/2" or so from the bottom of the grip to string. If you wish to check your tiller measure from the strings to the riser/insert fade outs in the limbs, your upper limb should measure more than your lower limb. When you replace your felt make sure that the arrow can pivot above the low point of the grip and sight window in a striaght line. Nocking point would best be done by shooting the bow agian and adjusting for your style of shooting.
Hope that can get you started
Trad Archery for Bowhunters (http://www.tradgang.com/docs/trad.html)
This will help some...until you can find someone that can give you some hands on help!
Good luck!
QuoteOriginally posted by soopernate:
If you don't know what you are doing, don't go and blame the seller or builder at this point. Find someone to help you like the others have suggested. Nothing worse than going into something and expecting to figure it out all on your own.
I wouldn't be casting blame if the bow wasn't brand new from the dealer. The felt started coming up after about 20-30 minutes of shooting.
Go to 3 Rivers Archery and buy a copy of "Traditional Bowhunter's Handbook" by TJ Conrads. Very useful info for beginning trad shooting. Then do your best to hook up with a mentor, Will really help get you started right. There are a bunch of Trad shooters in Michigan..
The rug rest was falling off a brand new bear grizzly when I bought one 5 months ago. It wasnt 3 rivers fault as it was new in the box from bear. I just put it back on with some 3m double sided tape and went shooting.... "Shooting the Stickbow" from 3rivers will answer about any queastion you may have on bows,arrows and shooting. I've been doing this long time and the book still has info I use...........