Can Morrison limbs be changed over so that they can be used on a Dalaa riser? Thanks
If they are ILF limbs,you just need to get the right hardware to use on a Dalaa riser.Or you can convert the Dalaa riser to accept ILF limbs with the proper hardware.
Thanks for the information.
Yep, all you need to do is remove the ILF bushings on the Morrison limbs and replace them with DAS bushings (you can buy them right from 3Rivers). It takes longer to type this than it does to do the swap. The draw weight is not exact science when mixing brands like that, but they should come in close to what is marked.