Trad Gang

Main Boards => PowWow => Topic started by: Bob B. on August 27, 2011, 04:53:00 PM

Title: Limb wood question ...
Post by: Bob B. on August 27, 2011, 04:53:00 PM
Relative to longbows, does it make that much difference in "feel" with limb cores made of cedar vs yew.  I am talking working lams here.  I know cedar can be quite smappy.  I am jsut wondering not so much in performance but in the smoothness if there is much of a difference between the two woods as a limb lamimation.

Bob.
Title: Re: Limb wood question ...
Post by: Jim Wright on August 27, 2011, 09:26:00 PM
It does'nt get any smoother than bamboo cores!
Title: Re: Limb wood question ...
Post by: Javi on August 27, 2011, 09:42:00 PM
QuoteOriginally posted by Jim Wright:
It does'nt get any smoother than bamboo cores!
Truedat...

it's the only core wood I'll use
Title: Re: Limb wood question ...
Post by: Koko Bow on August 28, 2011, 08:50:00 AM
I would think you'd need to compare the two woods on the same bow design and same weight.  O have not had the opportunity to do this but can pass along what I was told.  Limb cores on a longbow may be more noticeable (yew vs cedar) favoring the yew because longbow limb cores are usually thicker than recurves. So the yew may feel smoother to you. But what one "feels" can be a relative term.
Title: Re: Limb wood question ...
Post by: LookMomNoSights on August 28, 2011, 10:53:00 AM
Boo all the way!  Id ask for any curve or longbow to be cored with bamboo.  Its got a subtle,  warm,  buttery feel and energy about it that nothing else Ive tried so far comes close to.  funny to think that bamboo is actually a GRASS!   Best to have 2 bows next to each other to shoot.....one with boo cores and one with action wood or whatever.  Youl notice the subtle warmth Im talking about I think...and maybe even performance a bit!
Title: Re: Limb wood question ...
Post by: Lee Robinson . on August 28, 2011, 11:23:00 AM
I like bamboo...but if a core was "subtle, warm, and buttery" I don't think I would use it. LOL. Just messing with you of course.    :jumper:  

Instead, I prefer a snappy, stiff, light weight core that stores and transfers energy efficiently. Bamboo does do this too of course. Red elm is probably my favorite core material though. Maple or a small amount of osage also work well on the belly, but are too heavy for my liking to be used on the backside.
Title: Re: Limb wood question ...
Post by: bentpole on August 28, 2011, 11:33:00 AM
I love the looks of yew and cedar especially on a longbow as veneers. It has to be all about the core wood though. They do the work. 2 or more lams of bamboo or action boo with some nice cedar veneers will be my next bow choice. I never shot an all yew longbow [core wood and veneers] but have heard it's a great limb wood. I also like red elm and good ole  maple as core woods too. Bob I sent you an e-mail by the way.
Title: Re: Limb wood question ...
Post by: Bob B. on August 28, 2011, 01:45:00 PM
Bentpole, thanks for the reply.  I did not reciece the email, if you want, you can try to send it to prim.skills@yahoo.com.

(I am a YEW fanatic).

Bob.
Title: Re: Limb wood question ...
Post by: Troy Breeding on August 28, 2011, 02:16:00 PM
I normally use bamboo or lamboo in my bows. However, I did build a one piece longbow and used walnut and hickory as core woods with great results. Pound for pound in bow weight and grain for grain in arrow weight it was the fastest longbow I've ever built. Couldn't tell any differnce in how the bow shot when compared to the other bows as far as feal, but the chrono told a differnt story.

Troy
Title: Re: Limb wood question ...
Post by: Rob DiStefano on August 28, 2011, 07:35:00 PM
i prefer grass and not wood for limb cores - bamboo, tempered tonkin cane.  very Very VERY smooth.