Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: charlie phillips on August 12, 2011, 10:52:00 AM

Title: BRACE HEIGHT SAVANNAH LONG BOW
Post by: charlie phillips on August 12, 2011, 10:52:00 AM
What brace height do yall use on you'r SAVANNAH LONG BOWS.I'm trying to tune the bow.I'm using BEMAN ICS BOWHUNTER 500 125 FIELD TIPS THERE 28 AND 1/2 INCHS LONG.SET MY NOCK AT 5/8 ABOVE.BARE SHAFTS SHOOT PRETTY GOOD.MY FIRST LONG BOW I HAVE 2 RECURVES.The little stick is hard to get use to.


     TXCP   THANKS
Title: Re: BRACE HEIGHT SAVANNAH LONG BOW
Post by: JRY309 on August 12, 2011, 11:32:00 AM
The brace height range is from 6.25" to 7",I like mine set at 6&3/4" and my nock height at 1/2".Shoots best for me,I shoot a 6 strand 450+ on it.
Title: Re: BRACE HEIGHT SAVANNAH LONG BOW
Post by: USAFdad on August 12, 2011, 11:42:00 AM
When I was still shooting it mine was at 7" and nock is 3/8 with beman 400's. 7" and 1/2 up on the nock with cedar. Love the Savannah but it's hanging on the wall now, too much #'s for my shoulder.
Title: Re: BRACE HEIGHT SAVANNAH LONG BOW
Post by: portugeejn on August 12, 2011, 02:57:00 PM
7" brace height on mine.  My arrow setup is similar to yours, except I use Surewood Shafts Douglas Fir.  

I painted a single line crest at 7", on my otherwise plain arrows, so I can check the brace height easily.

RonP
Title: Re: BRACE HEIGHT SAVANNAH LONG BOW
Post by: Zradix on August 12, 2011, 04:02:00 PM
I go with a 7.25" on my 45#
Title: Re: BRACE HEIGHT SAVANNAH LONG BOW
Post by: TRADSTYK on August 12, 2011, 05:02:00 PM
I have mine braced at 6.25 and I shoot the 400 traditional shaft with 160 up front. It is a real shooter.
Title: Re: BRACE HEIGHT SAVANNAH LONG BOW
Post by: rraming on August 12, 2011, 06:04:00 PM
6 1/4" on mine - they suggest 6-7
Text only | Text with Images