I am shooting a Cascade Whitetail Hunter, 52" 53lbs. at 28". I draw about 27 1/2 to 28.
A guy gave me some PSE Carbon Force Dominator 100, with uninocks. They fly great but only weigh 355. Cut to 28"
I want to go to about 480grns with an index knock.
Any ideas?
Also I usually shoot wood at 28" and 11 to 12 grns. per pound with this bow.
I use the bemen 500 shaft and I am drawing 50 lb at 29 inch and my actual draw is 29 inch. I also wanted to add point weight, but am cheap and did not want to pay $12 for brass inserts. I got from a buddy 25 .243 85 grain copper bullets. I took the old point / insert out of the shaft, I then put the .243 in , but glued it with 24 hour epoxy. I then put the normal point insert in with the 125 gr point. I then pulleed the nock and put down a .22 cleaning rod to make sure the .243 copper point was seated on the normal point insert. I let them dry or cure for 48 hours and have been using, seem to work great. Adds to FOC and increase my overall arrow weight by 85 grains. I fletched the arrows with 3 5.5 bananna feathers ( 2 pink and 1 blue )
The PSE currently has 145 point, I did not know about adding point weight as that would change the spine.
I believe you may have to look at weight tubes or similar to add weight without changing the spine. Somewhere I read about an alternative was using weed wacker line to add weight. I have never tried it, but may be worth a shot.