Print Page - CE Heritage shafts vs. Broadheads

Title: CE Heritage shafts vs. Broadheads
Post by: BrownA5 on August 03, 2011, 10:49:00 AM

I just started shooting CE 150's> I am trying to find out if I want broadheads that 5/16 ferrule or 11/32. I am looking for either Magnus or Zwickeys in the 160 gr range. Appreciate any advice!

Title: Re: CE Heritage shafts vs. Broadheads
Post by: JamesKerr on August 03, 2011, 11:52:00 AM

Either one will work fine, but the 11/32 ferrule will allow the shaft to pass through an animal with less friction.

Title: Re: CE Heritage shafts vs. Broadheads
Post by: BrownA5 on August 03, 2011, 11:56:00 AM

James, thanks for the response. That was my thought also. In addition, the 11/32 seems to be more available especially since I will be gluing my heads to an adapter. Appreciate the advice!

Title: Re: CE Heritage shafts vs. Broadheads
Post by: cacciatore on August 03, 2011, 11:58:00 AM

I don't think there is any big difference,but i prefere the 11/32.

Title: Re: CE Heritage shafts vs. Broadheads
Post by: BrownA5 on August 03, 2011, 12:04:00 PM

Feliciano, thanks so much for the input. It is good to hear from Italy! My future daughter in law just got back 2 weeks ago - 2nd trip for her.

Title: Re: CE Heritage shafts vs. Broadheads
Post by: Shawn Leonard on August 03, 2011, 05:38:00 PM

Snuffers with 11/32nd. glue-on adapter. Deadly! Shawn

Title: Re: CE Heritage shafts vs. Broadheads
Post by: BrownA5 on August 03, 2011, 05:57:00 PM

Thanks Shawn for the tip. Someone else had also suggested Snuffers.

Trad Gang

Main Boards => PowWow => Topic started by: BrownA5 on August 03, 2011, 10:49:00 AM